-
The MDDU READY indication shows.
-These indications show in a shorttime:READY, WAIT RESPONSE, TRANSF IN PROG.
NOTE : Dependently from the MDDU P/N it can show the BUS-number and the
____ file-sizes between the messages TRANSF IN PROG and TRANSF COMPLETE. The file-sizes decrease to zero during the data loading. This shows the
progress of the data loading.
-Wait until the TRANSF COMPLETE indication comes on.
-Push the EJECT button and remove the software disk 10TV2 (SYSTEM SOFTWARE 2/2).
-Close the floppy disk access door. On the Data Loading Selector panel:
-Push the SEL CTL key.
-
The TRANSF COMPLETE indication showsafter the load procedure is completed correctly.
-
The MDDU READY indication shows.
On the Data Loading Selector display:
-The AIDS NOT SELECTED indication shows.
1EFF : 211-228, 301-302, 1 31-36-00Page 286 1 1 Aug 01/05R 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------NOTE : Dependently from the DLRB software it can show ACMS alternate of AIDS.
____
-Set the ON/OFF switch to OFF.
On the MCDU: On the MCDU display:
-Push the MCDU MENU mode key. - The AIDS Prompt must show. R **ON A/C 106-149, 211-299, 301-399, 401-499,
5. Close-up
________
Subtask 31-36-00-710-080
A. Do the test of the FDIMU (Ref. TASK 31-36-00-740-012).
Subtask 31-36-00-860-083
B. Put the system back to the serviceable condition.
(1) De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002)
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-36-00Page 287 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 051-099, 106-149, 211-299, 301-399, 401-499,
TASK 31-36-00-710-008
AIDS Software Load Procedure via PCMCIA-Card (PCMCIA = Personal Computer Memory Card International Association)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific PCMCIA-Card
No specific access platform 1.6 m (5 ft. 3 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power 31-36-00-710-001 Test of the DMU (1TV) 31-36-00-740-012 Test of the FDIMU (10TV) 52-41-00-010-002 Open the Avionics Compartment Doors for Access 52-41-00-410-002 Close the Avionics Compartment Doors after Access
3. Job Set-up
__________
Subtask 31-36-00-861-066
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
R 1EFF : 051-099, 106-149, 211-299, 301-399, 1 31-36-00Page 288 1401-499, 1Aug 01/05 1 1 1CES 1 Subtask 31-36-00-010-059
B. Get Access
(1) Put the access platform in position at the access door 824 in zone
128.
(2)
Open the access door 824. (Ref. TASK 52-41-00-010-002)
Subtask 31-36-00-865-071
C.
Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
**ON A/C 051-099,
121VU AIDS/DMU 4TV K15 R **ON A/C 106-149, 211-299, 301-399, 401-499,
121VU AIDS & RCDR/FDIMU 5TV K15 R **ON A/C 051-099, 106-149, 211-299, 301-399, 401-499,
4. Procedure
_________
**ON A/C 051-099,
Subtask 31-36-00-710-062 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM 指示/记录系统 4(14)
