-
The parameter number shows on thebottom of the display (scratchpad).
-On the AIDS REPORT LIMITS page addsfollowing indication:OLD LIMIT, NEW LIMIT, VALIDITY, REASON, VALIDATE and RETURN TO DEFAULT.
-
The new limit value shows on thebottom of the display (scratchpad).
-
The new limit value shows under theNEW LIMIT indication.
-
The new validity value shows on thebottom of the display (scratchpad).
-
The reason shows on the bottom of thedisplay (scratchpad).
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-36-00Page 249 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------NOTE : The REASON indication you can enter optional to inform the operator
____ about the reason of the limit change.
-Push the line key adjacent to * - The message VALIDATE OK shows. VALIDATE indication to save the new limit values.
On the center pedestal:
-The printer makes a printout of the revised limit values.
NOTE : If you push the line key adjacent to RETURN TO DEFAULT * the default
____
value is used (GSE). On the MCDU:
-Push the line key adjacent to < RETURN indication.
Subtask 31-36-00-740-078
D. Programmable Report CountersOn the MCDU display:
-The AIDS DMU PROGRAMMING page comesinto view.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On the MCDU: On the MCDU display:
- Push the line key adjacent to < - The AIDS REPORT COUNTERS page comes
REPORT INT COUNTERS indication. into view.
- Push the line key adjacent to the - The related AIDS REPORT X COUNTERS
related Report Number indication page comes into view.
(e.g. < REPORT 01).
- Set the selected report counter
value to its corresponding limit.
- Push the line key adjacent to < - The AIDS DMU PROGRAMMING page comes
RETURN indication. into view.
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-36-00Page 250 1 1 Aug 01/05 1 1 1CES 1 Subtask 31-36-00-740-079-A
E. Statistic Counters NOTE : On the AIDS:STATISTIC CNTR menu you can update the hours and the
____ cycles of the APU and the Engines (ENG-1 FLT HRS, ENG-2 FLT HRS, APU FLT HRS, ENG-1 CYCLES, ENG-2 CYCLES and APU CYCLES).
(1)
To update the APU hours and cycles do the procedure (Ref. AMM TASK 31-36-00-740-013) 'To update the APU hours and cycles into the FDIMU (10TV)'.
(2)
To update the Engine hours and cycles do the procedure (Ref. AMM TASK 31-36-00-740-014) 'To update the Engine hours and cycles into the FDIMU (10TV)'.
Subtask 31-36-00-740-080
F. Dump Disk Status Information
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On the MCDU:
-
Push the MCDU MENU mode key.
-
Push the line key adjacent to the < AIDS indication.
-
Push the line key adjacent to the < SPECIAL FUNCT/REPROGRAMMING indication.
-
Push the line key adjacent to the DUMP STATUS > indication.
-Enter the password with alphnumeric keys into the scratchpad.
-
Push the line key adjacent to the < ENTER PASSWORD indication.
-
Push the line key adjacent to the DUMP STATUS > indication.
On the MCDU display:
-
The MCDU MENU page shows.
-
The AIDS page shows.
-
The AIDS:SPECIAL FUNC/REPROG pageshows.
-
The AIDS ACCESS CONTROL page shows.
-An asterisk for each enteredcharacter shows on the scratchpad.
-
The AIDS:SPECIAL FUNC/REPROG pageshows.
-
The AIDS: DUMP DISK STATUS pageshows.
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-36-00Page 251 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION ------------------------------------- RESULT------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 4(5)
