(2)
Remove the screws (4) and the upper attachments (3).
(3)
Remove the caps (5).
(4)
Remove the nuts (6) and the inner eccentric-bushes (7) and the outer eccentric-bushes (8).
(5)
Remove the threaded bushes (9).
(6)
Remove the screws (17) and the covers (16).
(7)
Remove the nuts (14) and the washers (15).
(8)
Carefully lift the stowage (1) and remove it.
(9)
Record the position of the seat-track fittings (11) and (19).
Stowage Figure 401/TASK 25-27-44-991-001-A
R EFF : 001-049, 101-105, 25-27-44 Page 403 May 01/05
CES
R Stowage Figure 401A/TASK 25-27-44-991-001- 12 (SHEET 1)
EFF : 151-199, 25-27-44 Page 404 Nov 01/02
CES
R Stowage Figure 401A/TASK 25-27-44-991-001- 22 (SHEET 2)
EFF : 151-199, 25-27-44 Page 405 Nov 01/02
CES
(10)
Pull the synthetic fiber-cords (13) and remove the sealant from the seat tracks (12).
(11)
Remove the stoppers (10) and (18), and the seat-track fittings (11) and (19) from the seat tracks (12).
R **ON A/C 201-210,
Subtask 25-27-44-020-058-B
A. Removal of the Stowage 6579MM WARNING : SUPPORT THE UNIT/ASSEMBLY OR IT WILL FALL AND BECOME DAMAGED OR
_______ INJURE PERSONNEL. THE UNIT/ASSEMBLY IS HEAVY.
(Ref. Fig. 401B/TASK 25-27-44-991-001-B)
(1)
Open the door (2).
(2)
Remove the screws (3) and the cover (4).
(3)
Remove the screws (8) and the covers (7).
(4)
Remove the screws (6) and the upper attachments (5).
(5)
Remove the screws (15) and the covers (14).
(6)
Remove the nuts (9) and the cover plates (10).
(7)
Remove the shim plates (11).
(8)
Record the quantity and the position of the shim plates (11).
(9)
Remove the inner eccentric-bushes (12) and the outer eccentric-bushes (13).
R Stowage Figure 401B/TASK 25-27-44-991-001-B
EFF : 201-210, 25-27-44 Page 407 Nov 01/02
CES
(10)
Carefully lift the stowage (1) and remove it.
(11)
Remove the shim plates (16).
(12)
Record the quantity and the position of the shim plates (16).
(13)
Record the position of the seat-track fittings (17).
(14)
Pull the synthetic fiber-cords (19) and remove the sealant from the seat tracks (18).
(15)
Remove the seat-track fittings (17) from the seat tracks (18).
R **ON A/C 001-049, 101-105, 151-199, 201-210,
TASK 25-27-44-400-002
Installation of a Stowage FWD LH (Zone 231)
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific 1 SCRAPER - NON METALLIC
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 04-004 USA MIL-PRF-23827 TYPE I
SYNTH.ESTER BASED GREASE HIGH PRESSURE
(Ref. 20-31-00)
Material No. 09-019 USA AMS 3267/3
LOW ADHESION CORROSION INHIBITING SEALANT
(Ref. 20-31-00)
Material No. 11-003 USA ASTM D 740
METHYL-ETHYL-KETONE (Ref. 20-31-00)
Material No. 19-002 USA MIL-T-713
SYNTHETIC FIBRE CORD (NYLON) 2.5MM DIA.
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
11-00-00-400-007 Installation of the ESSO (Scotchcal Labels) 20-21-11-911-001 Tightening Torques for Standard Threaded Fasteners 24-42-00-861-001 Energize the Ground Service Network from the External
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备2(88)
