(Ref. Fig. 403A/TASK 25-26-43-991-004)
**ON A/C 301-399,
(Ref. Fig. 403B/TASK 25-26-43-991-004-B)
R EFF : 001-049, 101-105, 151-199, 201-210, 25-26-43Page 410 301-399, May 01/05
CES
Center Class Divider Figure 403/TASK 25-26-43-991-004-A
R EFF : 001-049, 101-105, 151-199, 25-26-43 Page 411 May 01/05
CES
Center Class Divider Figure 403A/TASK 25-26-43-991-004
R EFF : 051-052, 201-210, 25-26-43 Page 412 May 01/05
CES
R R Center Class Divider Figure 403B/TASK 25-26-43-991-004-B
R EFF : 301-399, 25-26-43 Page 413 Feb 01/05
CES
R **ON A/C 201-210, 301-399,
(1)
Lift and turn the lever (2) to loosen the class divider (1).
(2)
Remove the class divider (1).
R **ON A/C 001-049, 051-052, 101-105, 151-199, 201-210, 301-399,
TASK 25-26-43-400-004
Installation of the Center Class Divider
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 06-002 USA MIL-L-8937
LUBRICANT (OBSOLETE USE 06-011) (Ref. 20-31-00)
B. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
spring pin 25-26-43 01A-200
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power 25-26-41-400-013 Installation of the Curtains
R **ON A/C 001-049, 101-105, 151-199,
25-26-43-991-004-A Fig. 403
R EFF : 001-049, 051-052, 101-105, 151-199, 25-26-43Page 415 201-210, 301-399, May 01/05
CES CES CES
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R **ON A/C 051-052, 201-210,
25-26-43-991-004 **ON A/C 301-399, Fig. 403A
R 25-26-43-991-004-B Fig. 403B **ON A/C 001-049, 101-105, 301-399,
R 25-26-43-991-012 Fig. 404 **ON A/C 001-049, 051-052, 101-105, 151-199, 201-210, 301-399,
R 3. Job Set-up__________ **ON A/C 001-049, 101-105, 151-199, 201-210, 301-399,
Subtask 25-26-43-860-053
A. Aircraft Maintenance Configuration (1) Make sure that the ground service network is energized (Ref. TASK 24-42-00-861-001). (2) Clean the component interface and/or the adjacent area. (3) Do an inspection of the component interface and/or the adjacent area. (4) Make sure that the parts retained from the removed component are clean and in the correct condition.
(5) Make sure the the Overhead Stowage Doors are closed.
R **ON A/C 001-049, 051-052, 101-105, 151-199, 201-210, 301-399,
R 4. Procedure_________ **ON A/C 001-049, 101-105, 201-210, 301-399,
Subtask 25-26-43-560-053-A
A. Disassemble the Center Class Divider
R (1) Preparation of the Replacement Component **ON A/C 001-049, 101-105, 301-399,
R (Ref. Fig. 404/TASK 25-26-43-991-012) **ON A/C 001-049, 101-105, 201-210, 301-399,
(a) Remove the screws (1) and the washers (2). (b) Remove the bracket (3). (c) Remove and discard the spring pin (7). (d) Carefully remove the grip (6), the spring (8) and the washer (9). (e) Remove the screws (4) and the guide rail (5). (f) Remove the nut (15), the spring-washer (16) and the washer (17). (g) Remove the damper assembly (10). (h) Remove the bracket (14). (i) Remove the screws (18) and (19) and the washers (20). (j) Remove the guide rail (21). (2) Assemble the Class Divider (a) Put the guide rail (21) in position and install the screws (18) and (19) and the washers (20).
Center Class Divider - Assembly Figure 404/TASK 25-26-43-991-012
R EFF : 001-049, 101-105, 301-399, 25-26-43 Page 418 May 01/05
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备2(78)
