A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备2(116)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

R  OR IN YOUR EYES : 
R  -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 
R  MINUTES. 
R  -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. 
R  DO NOT BREATHE THE FUMES FROM THE MATERIAL. 
R  DO NOT SMOKE WHEN YOU USE THE MATERIAL. 
R  DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF 
R  HEAT. 
R  THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE 
R  AND SKIN IRRITANTS. 
R  (1) Remove the screws (11) and the joining strip (12). 
R  (2) Remove the sealant around the door sill with a SCRAPER - NON 
R  METALLIC. 
R  (3) Remove the screws (13) and the threshold (14).

 EFF : ALL
25-28-42Page 444
May 01/04

 (4) Removal of the sealant: R CAUTION : REMOVE THE FLOOR COVERING CAREFULLY TO PREVENT DAMAGE TO
_______ R THE CABIN FLOOR PANELS.
 (5)
 Remove the sealant (15) around the NTF with a non-metallic scraper.

 (6)
 Remove the NTF assy (1), the film (2) and the moisture barrier foil

 (4) from the floor panel (6). Use a SCRAPER - NON METALLIC to help the removal procedure.
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE
_______ THIS/THESE MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
 CAUTION : DO NOT CAUSE DAMAGE TO THE SURFACES. THE COMPONENTS ARE
_______ MADE OF CARBONFIBER REINFORCED PLASTIC.
 (a) Clean the component interface and/or the adjacent area with CLEANING AGENTS (Material No. 11-004).
 EFF : ALL
25-28-42Page 445

R R  Non-Textile Floor Covering (NTF) - "WULFMEYER" Processed Figure 403/TASK 25-28-42-991-011- 13 (SHEET 1)
 EFF :  ALL  25-28-42 Page 446 May 01/04
 CES 

 

R R  Non-Textile Floor Covering (NTF) - "WULFMEYER" Processed Figure 403/TASK 25-28-42-991-011- 23 (SHEET 2)
 EFF :  ALL  25-28-42 Page 447 May 01/04
 CES 

 

R R  Non-Textile Floor Covering (NTF) - "WULFMEYER" Processed Figure 403/TASK 25-28-42-991-011- 33 (SHEET 3)
 EFF :  ALL  25-28-42 Page 448 May 01/04
 CES 

 

 INTENTIONALLY BLANK

 

R Non-Textile Floor Covering (NTF) - "Conventional" Processed R Figure 404/TASK 25-28-42-991-012- 13 (SHEET 1)
 EFF : ALL
25-28-42Page 450
May 01/04 CES

R Non-Textile Floor Covering (NTF) - "Conventional" Processed R Figure 404/TASK 25-28-42-991-012- 23 (SHEET 2)
 EFF : ALL
25-28-42Page 451
May 01/04 CES

R Non-Textile Floor Covering (NTF) - "Conventional" Processed R Figure 404/TASK 25-28-42-991-012- 33 (SHEET 3)
 EFF : ALL
25-28-42Page 452
May 01/04 CES

R TASK 25-28-42-400-004
R Installation of NTF (Welding Procedure)
R 1. Reason for the Job__________________
R Self Explanatory
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------R REFERENCE QTY DESIGNATION R -------------------------------------------------------------------------------
R No specific masking paper R No specific masking tape R No specific vacuum cleaner R No specific Masking Tape R No specific TRIANGLE R No specific 1 BRUSH - BRISTLED, SMALL R No specific 1 HOT AIR BLOWER MAX OPERATING 370 DEG C (700 DEG F) R No specific 3 ROLLER - RUBBER R No specific 1 ROLLER - RUBBER, FOAM R No specific 2 SCRAPER - NON METALLIC R No specific 1 SPATULA - NON METALLIC
R B. Consumable Materials
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R Material No. 04-022 R R R Material No. 05-002 R R Material No. 08-006B R R Material No. 08-057 R R Material No. 08-082 R R
USA MIL-PRF-81322 GRADE 2
SYNTHE.HYDROCARBON GREASE HIGH PRESSURE
(Ref. 20-31-00)
USA MIL-P-8116
PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)
USA MMA-189 CLASS 2
ADHESIVE GENERAL PURPOSE (Ref. 20-31-00)

PRIMER (Ref. 20-31-00)
D DAN 1211-01
ACRYLIC PRESSURE SENSITIVE ADHESIVE FILM
(Ref. 20-31-00)

 EFF : ALL
25-28-42Page 453
May 01/04

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备2(116)