(4)
Make sure that the sidewall-panels are aligned to each other.
(5)
Install the screws (7) and the plugs (8).
(6)
Install the washers (3) and the screws (4).
(7)
Clean the decor-panel (5) (Ref. TASK 12-21-12-100-004).
EFF : ALL
25-23-43Page 413
Aug 01/05
R
CES
INTENTIONALLY BLANK
R (8) Put the decor-panel (5) and the decor-cover (6) in position and make
R sure that the decor-cover (6) is correctly engaged.
Subtask 25-23-43-420-054
R F. Installation of a 2-Frame Filler-Panel
(Ref. Fig. 404/TASK 25-23-43-991-008)
R NOTE : The installation procedure is applicable for the LH and RH____
R sidewall-panels.
R (1) Put the sidewall-panel (1) in position as recorded in the removal
R procedure.
R (2) Move the sidewall-panel (1) down and engage the yo-yo rollers in the
R brackets.
R (3) Push the lining strip (2) up between the sidewall-panel (1) and the
R adjacent panels, and make sure that they are correctly engaged.
R (4) Make sure that the sidewall-panels are aligned to each other.
R (5) Install the screws (4) and the covers (3).
5. Close-up________
Subtask 25-23-43-862-051
A. De-energize the ground service network
R (Ref. TASK 24-42-00-862-001).
EFF : ALL
25-23-43Page 415
Aug 01/00
PANELS - LOWER SIDEWALL - REMOVAL/INSTALLATION
______________________________________________
TASK 25-23-44-000-001 Removal of the Lower Sidewall Panels
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External
Power 25-21-41-000-001 Removal of the Passenger Seats 25-23-44-991-001 Fig. 401
3. Job Set-up
__________ Subtask 25-23-44-861-053
A. Energize the ground service network
(Ref. TASK 24-42-00-861-001)
Subtask 25-23-44-010-050
B. Get Access
(1) If necessary remove the passenger seats in the area of the panels you will remove. (Ref. TASK 25-21-41-000-001)
4. Procedure
_________ Subtask 25-23-44-020-050
A. Remove the panel (2)
(Ref. Fig. 401/TASK 25-23-44-991-001)
(1)
Use a punch to release the center pins of the quick release pins (1).
(2)
Pull the lower edge of the panel (2) away from the compartment wall.
EFF : ALL
25-23-44Page 401
Lower Sidewall Panels - Installation
Figure 401/TASK 25-23-44-991-001
EFF : ALL 25-23-44 Page 402
Feb 01/98
CES
(3)
Pull the panel (2) down and remove the fasteners (3) from the attachment fittings (4).
(4)
Remove the panel (2).
EFF : ALL
25-23-44Page 403
TASK 25-23-44-400-001 Installation of the Lower Sidewall Panels
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from
the External Power 25-21-41-400-001 Installation of the Passenger Seats 25-23-44-991-001 Fig. 401
3. Job Set-up
__________ Subtask 25-23-44-860-050
A. Aircraft Maintenance Configuration
(1)
Make sure that the ground service network is energized
(Ref. TASK 24-42-00-861-001)
(2)
Clean the component interface and/or the adjacent area.
(3)
Do an inspection of the component interface and/or the adjacent area.
(4)
Make sure that the parts retained from the removed component are clean and in the correct condition.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备2(18)
