(5)
Remove the doghouse, if installed (Ref. TASK 25-27-46-000-001).
4. Procedure
_________
**ON A/C 001-049, 051-099, 101-149, 201-299,
(Ref. Fig. 401/TASK 53-42-12-991-001) R **ON A/C 151-199, 401-499,
(Ref. Fig. 401A/TASK 53-42-12-991-001-A)
**ON A/C 301-399,
(Ref. Fig. 401B/TASK 53-42-12-991-001-B)
EFF : ALL
53-42-12Page 402
Cabin Floor Panel Installation - FR47 thru FR64 Figure 401/TASK 53-42-12-991-001
R EFF : 001-049, 051-099, 101-149, 201-299, 53-42-12 Page 403 May 01/05
CES
Cabin Floor Panel Installation - FR47/51 thru FR64 Figure 401A/TASK 53-42-12-991-001-A
R EFF : 151-199, 401-499, 53-42-12 Page 404 Aug 01/05
CES
R R Cabin Floor Panel Installation - FR47 thru FR64 Figure 401B/TASK 53-42-12-991-001-B
R EFF : 301-399, 53-42-12 Page 405 May 01/04
CES
**ON A/C ALL
Subtask 53-42-12-020-050
A. Removal of the floor panels:
NOTE : This procedure is applicable for all floor panels.
____
(1)
Pull the cord (1) up to remove the sealant from between the floor panel joints.
(2)
Remove the screws (3).
(3)
Remove the floor panels (4). NOTE : Identify the floor panels. This will help with the
____
installation.
EFF : ALL
53-42-12Page 406
May 01/04
R
CES
TASK 53-42-12-400-001
Installation of the Cabin Floor Panels at FR47 thru FR64
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific lint free cloth
No specific nonmetallic scraper R No specific Torque Wrench : range 0.00 to 1.20 m.daN R (0.00 to 9.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-002 USA MIL-P-8116 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)
Material No. 09-016 USA MIL-PRF-81733D TYPE II CLASS B
CORROSION INHIBITING FILLET CONSISTENCY
(Ref. 20-31-00)
Material No. 11-003 USA ASTM D 740
METHYL-ETHYL-KETONE (Ref. 20-31-00)
Material No. 19-027 F NSA3811
WHITE CORD-BRAIDED (NYLON) (Ref. 20-31-00)
EFF : ALL
53-42-12Page 407
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-21-41-000-001 Removal of the Passenger Seats 25-21-41-400-001 Installation of the Passenger Seats 25-26-42-000-001 Removal of a Partition 25-26-42-400-001 Installation of a Partition 25-27-46-400-001 Installation of a Doghouse 25-28-41-000-001 Removal of the Textile Floor-Covering 25-28-41-400-001 Installation of the Textile Floor-Covering 25-28-42-000-001 Removal of the Non-Textile Floor Covering (NTF) 25-28-42-400-001 Installation of the Non-Textile Floor Covering (NTF)
**ON A/C 001-049, 051-099, 101-149, 201-299,
53-42-12-991-001 Fig. 401
R **ON A/C 151-199, 401-499,
53-42-12-991-001-A Fig. 401A
**ON A/C 301-399,
53-42-12-991-001-B Fig. 401B
**ON A/C ALL
3. Job Set-up
__________
Subtask 53-42-12-860-050
A. Aircraft Maintenance Configuration
(1)
Make sure that the passenger seats are removed in the area as necessary (Ref. TASK 25-21-41-000-001).
(2)
Make sure that the partitions are removed (Ref. TASK 25-26-42-000-001).
EFF : ALL
53-42-12Page 408
(3)
Make sure that the textile floor covering is removed as necessary (Ref. TASK 25-28-41-000-001).
(4)
Make sure that the nontextile floor covering is removed as necessary (Ref. TASK 25-28-42-000-001).
4. Procedure
_________
**ON A/C 001-049, 051-099, 101-149, 201-299,
(Ref. Fig. 401/TASK 53-42-12-991-001)
R **ON A/C 151-199, 401-499,
(Ref. Fig. 401A/TASK 53-42-12-991-001-A)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身3(76)
