LH/RH
Figure 615/TASK 53-51-00-991-017
EFF : ALL 53-51-00 Page 661
Feb 01/98
CES
R TASK 53-51-00-210-019
R General Visual Inspection of Fuselage Skin around Cutout for Tail Compartment
R Access Door, between FR 70 and FR 73, STGR 25 RH and Bottom Center Line
R WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______
R START A TASK ON OR NEAR:
R - THE FLIGHT CONTROLS
R - THE FLIGHT CONTROL SURFACES
R - THE LANDING GEAR AND THE RELATED DOORS
R - COMPONENTS THAT MOVE.
R WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE CLEAR._______
R MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR
R DAMAGE.
R WARNING : WEAR AND ATTACH A SAFETY HARNESS WHEN YOU WORK ON HIGH SECTIONS. A_______
R FALL CAN INJURE OR KILL YOU.
R 1. Reason for the Job__________________
R Refer to the MPD TASK: 535103-01
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific warning notice
R No specific 1 ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
R B. Consumable Materials
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. 11-004 USA MIL-T-81533
R 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
R (Ref. 20-31-00)
R Material No. 19-003 USA AMS 3819
R LINT-FREE COTTON CLOTH (Ref. 20-31-00)
EFF : ALL
53-51-00Page 662
May 01/03
R C. Referenced Information
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R ASRM 53-51-11-101 (for corrective action)
R ASRM 53-51-11-201 (for corrective action)
R 53-51-00-991-019 Fig. 616
R 3. Job Set-up__________
R Subtask 53-51-00-941-066
R A. Install the ground support equipment.
R (1) Put a warning notice in position to tell persons not to operate the
R flight controls.
R (2) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in the required
R position.
R Subtask 53-51-00-110-066
R B. Cleaning Procedure
R WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______
R MATERIAL/S.
R USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
R WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK_______
R AREA WHEN YOU USE SPECIAL MATERIALS.
R IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH
R OR IN YOUR EYES :
R -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15
R MINUTES.
R -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS.
R DO NOT BREATHE THE FUMES FROM THE MATERIAL.
R DO NOT SMOKE WHEN YOU USE THE MATERIAL.
R DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF
R HEAT.
R THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE
R AND SKIN IRRITANTS.
R (1) Clean the area with a lint-free cotton cloth MISCELLANEOUS (Material
R No. 19-003) and the CLEANING AGENTS (Material No. 11-004), and let
R the area dry.
EFF : ALL
53-51-00Page 663
May 01/03
R 4. Procedure_________
R (Ref. Fig. 616/TASK 53-51-00-991-019)
R Subtask 53-51-00-210-071
R A. Inspection
R (1) Examine the following area for scratches, dents and cracks:
R - the fuselage skin around the cutout for the tail compartment access
R door between FR 70 and FR 73 and from stringer 25 RH to bottom
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身3(113)
