-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
(1) Remove the vertical stabilizer fairings 323AL and 323AR (Ref. TASK 53-55-11-000-001).
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
SPECIAL MATERIAL.
THIS MATERIAL IS DANGEROUS.
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(2) Clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
4. Procedure
_________
(Ref. Fig. 615/TASK 53-41-00-991-018)
Subtask 53-41-00-210-074
A. Detailed Visual Inspection
(1) Do a detailed visual inspection of the fuselage skin in the circumferential skin splice at:
-FR70,
-between STGR10 LH and STGR10 RH,
-
the crown center line,
-
the cutout corners for fin attachments,
EFF : ALL
53-41-00Page 665
May 01/04
R
CES
Circumferential Skin Splice FR70 Figure 615/TASK 53-41-00-991-018
R EFF : CES ALL 53-41-00 Page 666 May 01/04
-the external surface,
for cracks.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-101) for
____
the correct repair procedure.
5. Close-up
________ Subtask 53-41-00-410-092
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the vertical stabilizer fairings 323AL and 323AR (Ref. TASK 53-55-11-400-001).
(3)
Remove the warning notice(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-41-00Page 667
May 01/04
R
CES TASK 53-41-00-210-019
Detailed Visual Inspection of Skin around VHF-3 Antenna Cutout between FR52 and FR53 and between Stringer 1 LH/RH, External Surface
1.
Reason for the Job
__________________
Refer to the MPD TASK: 534112-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific lint-free cloth
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
23-12-11-000-002 Removal of the VHF Antenna (4RC3)
23-12-11-400-002 Installation of the VHF Antenna (4RC3)
ASRM 53-41-11-101 (for corrective action)
53-41-00-991-019 Fig. 616
EFF : ALL
53-41-00Page 668
3. Job Set-up
__________ Subtask 53-41-00-010-092
A. Get Access
(1) Remove the VHF 3 antenna (Ref. TASK 23-12-11-000-002). WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
SPECIAL MATERIAL.
THIS MATERIAL IS DANGEROUS.
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(2) Clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
4. Procedure
_________
(Ref. Fig. 616/TASK 53-41-00-991-019) Subtask 53-41-00-210-075
A. Inspection
(1) Examine the skin cutout of the VHF 3 antenna for:
-corrosion,
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身3(5)
