3. Job Set-up
__________
R **ON A/C 001-049, 051-099, 101-149, 201-299,
Subtask 53-41-00-010-153
A. Get Access
(1)
Open the AFT cargo compartment door (Ref. TASK 52-30-00-860-001).
(2)
Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in the required position.
(3)
If installed, remove the ACT2 from the AFT cargo compartment (Ref. TASK 28-11-27-000-001)
(4)
Remove the access panel 151CC in the ceiling of the AFT Cargo Compartment.
R **ON A/C 151-199, 401-499,
Subtask 53-41-00-010-153-A
A. Get Access
(1)
Open the AFT cargo compartment door (Ref. TASK 52-30-00-860-001).
(2)
Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in the required position.
(3)
If installed, remove the ACT3 from the AFT cargo compartment (Ref. TASK 28-11-27-000-004)
(4)
If installed, remove the ACT2 from the AFT cargo compartment (Ref. TASK 28-11-27-000-003)
(5)
Remove the access panel 151GC in the ceiling of the AFT Cargo Compartment.
**ON A/C 301-399,
Subtask 53-41-00-010-153-B
A. Get Access
(1)
Open the AFT cargo compartment door (Ref. TASK 52-30-00-860-001).
(2)
Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in the required position.
(3)
If installed, remove the ACT2 from the AFT cargo compartment (Ref. TASK 28-11-27-000-001)
(4)
Remove the access panel 151CC in the ceiling of the AFT Cargo Compartment.
**ON A/C ALL
Subtask 53-41-00-110-102
B. Cleaning Procedure
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
(1) Clean the area with a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003) and the CLEANING AGENTS (Material No. 11-004), and let the area dry.
4. Procedure
_________
(Ref. Fig. 652/TASK 53-41-00-991-077)
R **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
Subtask 53-41-00-210-121
A. Inspection
(1) Examine the following area for dents, scratches and cracks:
-the AFT cargo door actuator attach bracket between the floor beams at FR 53, FR 54 and FR 55.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-49-101) for
____
the allowable damage limits.
AFT Cargo Door Actuator Attach Bracket Figure 652/TASK 53-41-00-991-077
R EFF : ALL 53-41-00 Page B650 Nov 01/04
CES
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-49-201) for
____
the correct repair procedure.
R **ON A/C 151-199, 401-499,
Subtask 53-41-00-210-121-A
A. Inspection
(1) Examine the following area for dents, scratches and cracks:
-the AFT cargo door actuator attach bracket between the floor beams at FR 58, FR 59 and FR 60.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-101) for
____
the allowable damage limits.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-201) for
____
the correct repair procedure.
**ON A/C ALL
5. Close-up
________
**ON A/C 001-049, 051-099, 101-149, 201-299,
Subtask 53-41-00-410-151
A. Close Access
(1)
Install the access panel 151CC in the ceiling of the AFT Cargo Compartment.
(2)
If removed, install the ACT2 in the AFT cargo compartment (Ref. TASK 28-11-27-400-001)
(3) 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身3(44)
