• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 08:50来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

R  DO NOT BREATHE THE GAS. 
R  THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. 
R  GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (1) Remove the fairings 323AL, 323AR (Ref. TASK 53-55-11-000-001). 
R
 (2) Carefully clean the inspection area with CLEANING AGENTS (Material
 No. 11-004) and a lint-free cloth. 
R
 4. Procedure_________
 (Ref. Fig. 611/TASK 53-51-00-991-006)
 Subtask 53-51-00-210-059
 A. Inspection:
 (1) Examine the external fin to fuselage attach fittings for:
 - cracks.
 NOTE : If necessary, refer to the ASRM (Ref. ASRM 535500000) for the____
 correct repair procedure.

 EFF : ALL
53-51-00Page 643
Feb 01/99


 External Fin to Fuselage Attachment Fittings
 Figure 611/TASK 53-51-00-991-006
 EFF :  ALL  53-51-00 Page 644 
Feb 01/98
 CES 

 

 5. Close-up
________ Subtask 53-51-00-916-060
 A. Apply STORAGE PRESERVATION (Material No. 15-005) to the inspection area, if you have removed the surface protection (Ref. TASK 51-75-13-916-001).
 Subtask 53-51-00-410-058
 B. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the fairings 323AL, 323AR (Ref. TASK 53-55-11-400-001).

 (3)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.


 EFF : ALL
53-51-00Page 645


 TASK 53-51-00-210-014
 Detailed Visual Inspection of Rear Pressure Bulkhead AFT Face, Reinforcement Splice at Forward Fin Attachment Area
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 535105-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific lint-free cloth
 No specific access platform 3 m (9 ft. 10 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 Material No. 15-005  AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 15-006  AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-75-13-916-001 Repair to a layer of Moisture-Removing Oil ASRM 535116000 (for corrective action) 53-51-00-991-013 Fig. 612
 EFF : ALL
53-51-00Page 646


 3. Job Set-up__________
 Subtask 53-51-00-010-068
 A. Get Access 
R  WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION_______ 
R  BEFORE YOU START A TASK ON OR NEAR: 
R  - THE FLIGHT CONTROLS 
R  - THE FLIGHT CONTROL SURFACES 
R  - THE LANDING GEAR AND THE RELATED DOORS 
R  - COMPONENTS THAT MOVE. 
R  WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE SPECIAL_______ 
R  MATERIAL. 
R  THIS MATERIAL IS DANGEROUS. 
R  WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ 
R  MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. 
R  OBEY THE MANUFACTURERS INSTRUCTIONS. 
R  PUT ON PROTECTIVE CLOTHING. 
R  DO NOT GET THEM IN YOUR MOUTH. 
R  DO NOT SMOKE. 
R  DO NOT BREATHE THE GAS. 
R  THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. 
R  GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (1) Put the access platform in position below the access door 312AR. 
R
 (2) Open the access door 312AR.
 (3) Get access to the inspection area.
 (4) Carefully clean the inspection area with CLEANING AGENTS (Material
 No. 11-004) and a lint-free cloth. 
R


 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM FUSELAGE 机身3(109)