53-41-00-991-047 Fig. 660
3. Job Set-up
__________
Subtask 53-41-00-010-121
A. Get Access
(1) Put the access platform in position adjacent to FR64.
Subtask 53-41-00-860-057
B. Preparation of the Inspection Areas
(Ref. Fig. 660/TASK 53-41-00-991-047)
(1) Make sure that the outer surface of the inspection area is clean and smooth.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE
_______ THIS/THESE MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
(2)
If necessary, clean the outer surface of the inspection area with the CLEANING AGENTS (Material No. 11-004) and a MISCELLANEOUS (Material No. 19-003). Make sure the inspection area is dry before you continue.
(3)
If necessary, make the outer surface of the inspection area smooth with the abrasive cloth, grade 280.
EFF : ALL 53-41-00Page C625
Nov 01/04
R
CES
Circumferential Skin Splice at FR64, from STGR10 LU/RH to Crown Centerline Figure 660/TASK 53-41-00-991-047
EFF : ALL 53-41-00Page C626 Nov 01/04 R CES
(4)
Do a visual inspection of the outer surface of the inspection area. Look for damage, and defects in the shape of the external surface.
(5)
If you find damage :
(a)
Refer to the ASRM (Ref. ASRM 51-11-00-001) for the classification of the damage.
(b)
If you find corrosion damage:
-
refer to the ASRM (Ref. ASRM 51-22-00-001) for the general corrosion data
-
refer to the ASRM (Ref. ASRM 51-74-00-001) for the repair of the corroded areas.
(c)
If you find other types of damage:
-Refer to the ASRM (Ref. ASRM 51-73-00-001) for the repair of the minor damage.
4. Procedure
_________
(Ref. Fig. 660/TASK 53-41-00-991-047)
Subtask 53-41-00-220-058
A. Special Detailed Inspection Procedure
(1)
Do the special detailed inspection (Ref. NTM 534121-Part.6) of the splice plates at the circumferential skin splice at FR64. Do this externally from the STGR10 LH/RH positions, to the crown centerline.
(2)
Write a report about the damage you find during the inspection procedure.
NOTE : No repair data is given in the ASRM (Ref. ASRM 53-41-11-001)
____ for the splice plates of the circumferential skin splice at FR64. If a splice plate is damaged:
-you must contact AIRBUS INDUSTRIE for the necessary corrective action procedure.
5. Close-up
________
Subtask 53-41-00-370-054
A. Repair of the Surface Protection
(1) If necessary, repair the paint coatings in the inspection areas (Ref. TASK 51-75-12-300-003) or (Ref. TASK 51-75-12-300-001).
EFF : ALL 53-41-00Page C627
Nov 01/04
R
CES Subtask 53-41-00-410-118
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the access platform(s).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL 53-41-00Page C628
Nov 01/04
R
CES TASK 53-41-00-220-011
Special Detailed Inspection of Aft Cargo Door Lock Fitting and Surrounding Structure between FR53 and FR55A, from STGR41 RH to Door Sill (6 Places)
1. Reason for the Job
__________________
Refer to the MPD TASK: 534156-02
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific abrasive cloth, grade 280
No specific access platform 1.8 m (5 ft. 11 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身3(63)
