B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
Material No. 15-005 AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-006 AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-75-13-916-001 Repair to a layer of Moisture-Removing Oil ASRM 535300000 (for corrective action) 53-51-00-991-008 Fig. 606
EFF : ALL
53-51-00Page 622
3. Job Set-up
__________
Subtask 53-51-00-010-061
A. Get Access
R WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION_______
R BEFORE YOU START A TASK ON OR NEAR:
R - THE FLIGHT CONTROLS
R - THE FLIGHT CONTROL SURFACES
R - THE LANDING GEAR AND THE RELATED DOORS
R - COMPONENTS THAT MOVE.
R WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE SPECIAL_______
R MATERIAL.
R THIS MATERIAL IS DANGEROUS.
R WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______
R MATERIALS ONLY WITH A GOOD SUPPLY OF AIR.
R OBEY THE MANUFACTURERS INSTRUCTIONS.
R PUT ON PROTECTIVE CLOTHING.
R DO NOT GET THEM IN YOUR MOUTH.
R DO NOT SMOKE.
R DO NOT BREATHE THE GAS.
R THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT.
R GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(1) Put the access platform in position below the access door 312AR.
(2) Put the access platform in position below the access door 314AR.
(3) Put a warning notice in position to tell persons not to operate the
APU.
(4) Open the access doors 312AR, 314AR.
R
(5) Carefully clean the THS attachment and back-up structure with
CLEANING AGENTS (Material No. 11-004) and a lint-free cloth.
R
EFF : ALL
53-51-00Page 623
Feb 01/99
4. Procedure
_________
(Ref. Fig. 606/TASK 53-51-00-991-008) Subtask 53-51-00-210-060
A. Inspection:
(1) Examine the THS attachment and back-up structure for:
-corrosion,
-cracks.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 535300000) for the
____
correct repair procedure.
5. Close-up
________ Subtask 53-51-00-916-052
A. Apply STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-006) to the inspection area (Ref. TASK 51-75-13-916-001).
Subtask 53-51-00-410-060
B. Close Access
(1)
Make sure that the electrical connectors are clean and in the correct condition.
(2)
Make sure that the work area is clean and clear of tool(s) and other items.
(3)
Close the access doors 312AR, 314AR.
(4)
Remove the access platform(s).
(5)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-51-00Page 624
THS Attachment and Back-up Structure at FR77 between STGR8 and STGR21
Figure 606/TASK 53-51-00-991-008
EFF : ALL
53-51-00Page 625
Feb 01/98
CES TASK 53-51-00-210-008
Detailed Visual Inspection of Rear Pressure Bulkhead Forward Face above Cabin Floor Level
1. Reason for the Job
__________________
Refer to the MPD TASK: 535123-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific lint-free cloth
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身3(104)
