-refer to the procedure steps in the NTM (Ref. NTM 534129-Part.6), 'Preparation for Inspection'
-measure the thickness of the paint at the inspection areas
-make sure that the paint thickness is less than the given limit.
(2)
Write a report about the damage you find during the inspection procedure.
(3)
If you find damage:
(a)
Refer to the ASRM (Ref. ASRM 51-11-00-001) for the classification of the damage.
(b)
If you find corrosion damage:
-
refer to the ASRM (Ref. ASRM 51-22-00-001) for the general corrosion data
-
refer to the AMM (Ref. AMM 51-74-00-001) for the repair of the corroded areas.
(c)
If you find other types of damage:
-refer to the ASRM (Ref. ASRM 53-41-11-101) for the necessary data.
5. Close-up
________
Subtask 53-41-00-370-061
A. Repair of the Surface Protection
(1) If necessary, repair the paint coatings in the inspection areas (Ref. TASK 51-75-12-300-003) or (Ref. TASK 51-75-12-300-001).
Subtask 53-41-00-410-164
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the floor panels 162JF and 161AF (Ref. TASK 53-42-17-400-001) in the bulk cargo compartment.
(3)
Close the bulk cargo-compartment door (Ref. TASK 52-30-00-860-008).
(4)
Remove the access platform(s).
(5)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
INTENTIONALLY BLANK
**ON A/C ALL
TASK 53-41-00-210-834
Detailed Visual Inspection of AFT Passenger/Crew Door-Cutout above Cabin Floor Level, at FR66 and FR68 from STGR22 to STGR23 and around Girt Bar Fittings
1. Reason for the Job
__________________
R Refer to the MPD TASK: 534143-01
2. Job Set-up Information
______________________
A. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 11-026 GB DEF-STAN 68-148/1
SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
Material No. 15-005 AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-006 AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 25-23-45-000-003 Removal of the Door Frame Linings at the Left AFT Passenger/Crew Door 25-23-45-000-004 Removal of the Door Frame Linings at the Right AFT Passenger/Crew Door 25-23-45-400-005 Installation of the Door Frame Linings at the Right
AFT Passenger/Crew Door
25-23-45-400-008 Installation of the Door Frame Linings at the Left
AFT Passenger/Crew Door
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R 51-73-11-300-001 51-73-11-300-004 51-74-11-300-001 52-10-00-010-001 52-13-31-000-003 52-13-31-400-003 ASRM 51-11-00-001 ASRM 51-11-11-001 ASRM 51-22-00-001 53-41-00-991-095 Repair of Minor Damage on Aluminum Clad ComponentsRepair of Minor Damage on Unclad ComponentsRepair of Corroded AreasOpening of the Passenger/Crew Door Removal of the Girt Bar Fittings Installation of the Girt Bar Fittings(for corrective action)Fig. 663
3. Job Set-up__________
Subtask 53-41-00-010-170
A. Open the AFT passenger/crew door (Ref. TASK 52-10-00-010-001).
Subtask 53-41-00-860-069
B. Aircraft Maintenance Configuration
(1) Energize the ground service network (Ref. TASK 24-42-00-861-001).
(2) Set the light switches in the passenger compartment to ON.
Subtask 53-41-00-010-171
C. Get Access
R R (1) Remove the door frame linings of the AFT passenger/crew doors (Ref. TASK 25-23-45-000-003) and (Ref. TASK 25-23-45-000-004).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身3(68)
