-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
(1) Put the adjustable platform in position below the windows.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
SPECIAL MATERIAL.
THIS MATERIAL IS DANGEROUS.
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(2) Clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
4. Procedure
_________
Subtask 53-41-00-210-099
A. Inspection
(1) Examine the skin at the window cutouts for:
-cracks,
-corrosion,
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-101) for
____
the correct repair procedure.
EFF : 301-399, 53-41-00Page A636
Nov 01/04
R
CES 5. Close-up
________ Subtask 53-41-00-410-128
A. Close Access
(1)
Remove the access platform(s).
(2)
Remove the warning notice(s).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : 301-399, 53-41-00Page A637
Nov 01/04
R
CES TASK 53-41-00-210-048
Detailed Visual Inspection of the Door Stop Fittings on FR47.2A and FR47.4, LH and RH
1.
Reason for the Job
__________________
Refer to the MPD TASK: 534190-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific lint-free cloth
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
52-22-00-010-001 Opening of the Emergency Exit Doors from the
Passenger Compartment
52-22-00-410-001 Closing of the Emergency Exit Doors from the
Passenger Compartment
ASRM 53-46-11-101 (for corrective action)
53-41-00-991-041 Fig. 631
3. Job Set-up
__________
Subtask 53-41-00-010-133
A. Get Access
(1) Open the applicable emergency exit doors (Ref. TASK 52-22-00-010-001).
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
SPECIAL MATERIAL.
THIS MATERIAL IS DANGEROUS.
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(a) Clean the door stop fittings with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
4. Procedure
_________
Subtask 53-41-00-210-101
A. Inspection
(Ref. Fig. 631/TASK 53-41-00-991-041)
(1) Examine the door stop fittings for:
-wear,
-cracks.
NOTE : If necessary refer to the ASRM (Ref. ASRM 53-46-11-101) for
____ the limits and the correct repair procedure.
EFF : 301-399, 53-41-00Page A639
Nov 01/04
R
CES
Door Stop Fittings Figure 631/TASK 53-41-00-991-041
R EFF : CES 301-399, 53-41-00 Page A640 Nov 01/04
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身3(20)
