R **ON A/C 151-199, 401-499,
Subtask 53-41-00-210-105-A
A. Inspection
(1) Examine the lateral FR55A and FR59 that you can see at the AFT cargo door cutout for:
-corrosion,
-cracks
-and any other damage.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-12-201) for
____
the correct repair procedure.
**ON A/C ALL
Subtask 53-41-00-916-080
B. Temporary Protection Procedure (only necessary for CPCP (Corrosion Prevention and Control Program) MPD Tasks 534160-01-1 and 534160-01-2)
(1) Apply STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-005A) or STORAGE PRESERVATION (Material No. 15-006) or equivalent to the inspection area as necessary.
AFT Cargo Door Cutout - Lateral Figure 634/TASK 53-41-00-991-045
R EFF : ALL 53-41-00 Page A661 Nov 01/04
CES
5. Close-up
________
Subtask 53-41-00-410-135
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the access platform(s).
(3)
Close the Aft cargo-compartment door (Ref. TASK 52-30-00-860-002).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R **ON A/C 001-049, 051-099, 101-149, 221-221, 224-224, 228-228,
TASK 53-41-00-210-804
General Visual Inspection of Sealing Profile of Bulk Cargo Door Cutout at Upper Corners
1. Reason for the Job
__________________
Refer to the MPD TASK: 534172-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific lint free cloth
No specific access platform 3.0 m (9 ft. 10 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
Material No. 15-005 AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-005A AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-006 AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
R EFF : 001-049, 051-099, 101-149, 221-221, 53-41-00Page A663 224-224, 228-228, May 01/05
CES C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-30-00-860-006 Open the Bulk Cargo-Compartment Door 52-30-00-860-008 Close the Bulk Cargo-Compartment Door ASRM 53-41-11-101 (for corrective action) 53-41-00-991-046 Fig. 635
3. Job Set-up
__________
Subtask 53-41-00-010-138
A. Get Access
(1)
Put the access platform adjacent to the BULK cargo compartment door.
(2)
Open the BULK cargo compartment door (Ref. TASK 52-30-00-860-006).
Subtask 53-41-00-110-089
B. Cleaning Procedure
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
(1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint free cloth.
R EFF : 001-049, 051-099, 101-149, 221-221, 53-41-00Page A664 224-224, 228-228, May 01/05
CES 4. Procedure
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身3(26)
