(4)
Apply SPECIAL MATERIALS (Material No. 05-013A) and SEALANTS (Material No. 09-018) to the mating surfaces of the fairing (2).
Subtask 53-55-11-420-050
B. Installation:
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Put the fairing (2) in position.
(3)
Install the screws (1) and TORQUE to 0.3 m.daN (26.54 lbf.in).
(4)
Make sure that the clearance 'a' is 1.0 +1.0 -1.0 mm (0.0393 +0.0393-0.0393 in.) between the fairing (2), the dorsal fin (3) and the rudder fairing (4).
(5)
Make sure that the clearance 'c' is 10.0 +3.5 -3.5 mm (0.3937 +0.1377 -0.1377 in.) between the fairing (2) and the fuselage.
(6)
Apply a bead of SEALANTS (Material No. 09-016A) to the edges of the fairing (2).
5. Close-up
________ Subtask 53-55-11-410-051
A. Close Access
(1)
Remove the access platform(s).
(2)
Remove the warning notice(s).
EFF : ALL
53-55-11Page 408
(3) Remove the ground support and maintenance equipment, the special and
standard tools and all other items.
Subtask 53-55-11-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 5CC1, 5CC2, 14CC1, 14CC2, 15CC, 15CE1, 15CE2, 16CE1, 16CE2, 19CE1, 19CE2, 19CE3, 21CE1, 21CE2, 21CE3, 22CE.
EFF : ALL
53-55-11Page 409
FAIRINGS - RUDDER - REMOVAL/INSTALLATION
________________________________________ TASK 53-55-12-000-001 Removal of the Rudder Fairings 325AL and 325AR
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific warning notices
No specific access platform 6.0 m (19 ft. 8 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-10-00-864-001 Depressurize the Green Hydraulic System 29-10-00-864-002 Depressurize the Yellow Hydraulic System 29-10-00-864-003 Depressurize the Blue Hydraulic System 53-55-12-991-001 Fig. 401
3. Job Set-up
__________ Subtask 53-55-12-941-050
A. Aircraft Maintenance Configuration
(1) Put the warning notices in the cockpit to tell persons not to operate the flight controls.
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION
_______
BEFORE YOU START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
(2) Put the access platform below the zone 325.
EFF : ALL
53-55-12Page 401
Feb 01/99
R
CES EFF : ALL
Subtask 53-55-12-864-050
B. Depressurize the Green, Yellow and Blue hydraulic systems (Ref. TASK 29-10-00-864-001) (Ref. TASK 29-10-00-864-002) (Ref. TASK 29-10-00-864-003).
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES_______ ARE CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
Subtask 53-55-12-865-050
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R R R R 49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 49VU FLIGHT CONTROLS/THS/ACTR/MOT2 49VU FLIGHT CONTROLS/SEC1/NORM/SPLY 49VU AUTO FLT/FAC1/28VDC 49VU AUTO FLT/FAC1/26VAC 105VU FLIGHT CONTROLS/ELAC2/STBY SPLY 105VU FLT CTL/ELAC1/STBY SPLY 105VU FLT CTL/SEC1/STBY SPLY 121VU AUTO FLT/RUDDER/TRIM/IND 121VU AUTO FLT/FAC2/28VDC 121VU AUTO FLT/FAC2/26VAC 121VU FLIGHT CONTROLS/SEC3/SPLY 121VU FLIGHT CONTROLS/SEC2/SPLY 15CE1 19CE2 21CE1 5CC1 14CC1 16CE2 16CE1 22CE 15CC 5CC2 14CC2 21CE3 21CE2 B11B09B08B04B03 A02 A01 B01 M20M19M18Q19Q18
53-55-12Page 402
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU FLIGHT CONTROLS/THS ACTR/MOT3 19CE3 Q17 121VU FLIGHT CONTROLS/THS ACTR/MOT1 19CE1 Q16 121VU FLIGHT CONTROLS/ELAC2/NORM/SPLY 15CE2 R20
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身3(126)
