曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
(2) If you removed the left motor:
Remove the safety tag and close this circuit breaker:
F/O Electrical System Panel, P6-2
Row Col Number Name
B 13 C00363 FLIGHT CONTROL SHUTOFF VALVES FLT CONT
SUBTASK 27-09-31-860-007
(3) If you removed the right motor:
Remove the safety tag and close this circuit breaker:
F/O Electrical System Panel, P6-2
Row Col Number Name
C 13 C01074 FLIGHT CONTROL SHUTOFF VALVES FLT CONT
SUBTASK 27-09-31-730-002
(4) Do this task: Flight Controls Shutoff Valve Test, TASK 27-09-31-710-801.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-09-31
Page 410
Oct 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
FLIGHT CONTROLS SHUTOFF VALVE - ADJUSTMENT/TEST
1. General
A. This procedure has the task to do a test of the flight controls shutoff valve.
TASK 27-09-31-710-801
2. Flight Controls Shutoff Valve Test
A. General
(1) The flight controls shutoff valve is part of the flight controls hydraulic module. The hydraulic
module for the hydraulic system A is found in the left main wheel well. The hydraulic module for
the hydraulic system B is found in the right main wheel well.
B. References
Reference Title
24-22-00-860-811 Supply Electrical Power (P/B 201)
29-11-00-860-801 Hydraulic System A or B Pressurization (P/B 201)
29-11-00-860-805 Hydraulic System A or B Power Removal (P/B 201)
C. Location Zones
Zone Area
133 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Left
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
211 Flight Compartment - Left
212 Flight Compartment - Right
D. Prepare for the Test
SUBTASK 27-09-31-860-008
(1) Do this task: Supply Electrical Power, TASK 24-22-00-860-811.
SUBTASK 27-09-31-860-009
(2) Make sure that these circuit breakers are closed:
F/O Electrical System Panel, P6-2
Row Col Number Name
B 13 C00363 FLIGHT CONTROL SHUTOFF VALVES FLT CONT
C 13 C01074 FLIGHT CONTROL SHUTOFF VALVES FLT CONT
SUBTASK 27-09-31-860-010
WARNING: MAKE SURE ALL PERSONS AND EQUIPMENT ARE CLEAR OF THE FLIGHT CONTROL
SURFACES, THE THRUST REVERSERS, AND THE LANDING GEAR. THESE
COMPONENTS CAN MOVE SUDDENLY WHEN YOU SUPPLY HYDRAULIC POWER.
THIS CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(3) To pressurize hydraulic systems A and B, do this task: Hydraulic System A or B
Pressurization, TASK 29-11-00-860-801.
E. Do a Test of the Flight Controls Shutoff Valve
SUBTASK 27-09-31-710-001
(1) Do a test of flight controls shutoff valve:
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-09-31
Page 501
Oct 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(a) Make sure the FLT CONTROL switches on the flight controls panel, P5, are in the ON
position.
(b) Make sure the manual override lever on the flight controls shutoff valve motor is in position
1 for hydraulic systems A and B.
(c) Operate the aileron control wheel to bleed air from the hydraulic system lines and
components.
1) Make sure there is no leakage of hydraulic fluid at the flight control hydraulic modules.
(d) Operate the aileron control wheel, control column, and rudder pedals.
1) Make sure the ailerons, elevators, and rudder operate satisfactory.
(e) Set the FLT CONTROL switches to the OFF position.
1) Make sure the manual override lever on the flight controls shutoff valve motor is in
position 2 for hydraulic systems A and B.
(f) Operate the rudder pedals.
NOTE: The rudder must not operate hydraulically, but the rudder pedals will operate
manually. Some rudder surface movement can occur if the pedal input is large
enough to mechanically displace the PCU actuating piston. Full rudder authority
may be available.
1) Make sure the force to operate the rudder pedals is higher now than when you set the
FLT CONTROLS switches to the ON position.
F. Put the Airplane Back to Its Usual Condition
SUBTASK 27-09-31-860-011
(1) Set the FLT CONTROL switches to the ON position.
SUBTASK 27-09-31-860-012
(2) To remove power from hydraulic systems A and B, do this task: Hydraulic System A or B
Power Removal, TASK 29-11-00-860-805.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-09-31
Page 502
Oct 10/2005
D633A101-GUN
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飞机维护手册1(67)
