52-34-01
ALL ú
ú 04 Page 608
ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
(d) Do the "Examine the wear limits" step below.
(2) S 036-017Remove the door restraint arm attach bolt (Section C-C). (a) Do the "Examine the wear limits" step below.
(3) S 036-003Remove the plunger from the master latch lock handle (Section D-D). (a) Do the "Examine the wear limits" step below.
(4) S 036-004Remove the lock pin from the master latch lock handle (Section D-D). (a) Open the master latch lock handle. (b) Remove the pin that goes through the lock pin. (c) Remove the pivot pin from the trigger. (d) Remove the trigger. (e) Remove the lock pin. (f) Do the "Examine the wear limits" step below.
(5) S 036-005Remove the shaft through the master latch lock handle (Section D-D). (a) Disconnect the pushrod from the bellcrank. (b) Loosen the nut and remove the shaft. (c) Do the "Examine the wear limits" step below.
(6) S 036-006Remove the bolt from the midspan bellcrank (Section E-E). (a) Do the "Examine the wear limits" step below.
(7) S 216-016Examine the condition of the hinge. (a) Look for corrosion. (b) Look for deterioration. (c) Do the "Examine the wear limits" step below.
(8) S 226-018Examine the wear limits (Fig 601). (a) Measure the part where it is necessary. (b) Compare the values you measure to the correct values shown in Fig 601. (c) Obey the instructions in Fig 601 to repair or replace the part.
NOTE:____ If the part is satisfactory, install it.
(d) Do the step below that tells how to install the part.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-34-01
ALL ú ú 01 Page 609 ú Oct 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 436-009
(9)
Install the latch cams (Section A-A).
(a)
Put the latch cams through the bushings.
(b)
Install the axial bolt through the latch cams.
(c)
Install the retainer spring on the retainer.
S 436-010
(10)
Install the attach bolt on the door restraint arm (Section C-C).
S 436-011
(11)
Install the plunger in the master latch lock handle (Section D-D).
S 436-012
(12)
Install the lock pin in the master latch lock handle (Section D-D).
(a)
Put the lock pin and the trigger in position.
(b)
Install the pivot pin through the trigger.
(c)
Safety the pivot pin with a cotter pin.
(d)
Put the pin through the lock pin.
(e)
Close the master latch lock handle.
S 436-013
(13)
Install the bolt on the midspan bellcrank (Section E-E).
S 436-014
(14)
Install the hinge section that you removed (Section I-I and J-J) (AMM 52-34-08/401).
TASK 52-34-01-206-019
3. Inspect the Forward/Aft Cargo Door Hinge Mechanism
__________________________________________________
NOTE: This is a scheduled maintenance task.
____
A. References
(1)
AMM 52-34-08/401, Door Hinge
B.
Access
(1)
Location Zone 122 Forward Cargo Container Compartment, Forward Half 142 Aft Cargo Container Compartment
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-34-01
ALL ú ú 01 Page 610 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
(2)
Access Panel
821R Door - Forward Cargo Compartment
822R Door - Aft Cargo Compartment
C.
Procedure
S 216-020
(1)
Examine the condition of the hinge.
(a)
Look for corrosion.
(b) 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：747-400 AMM 飞机维护手册 舱门 DOORS 3(54)
