-
for the flap track 4, use the R/I TOOL FLAP BEARING
(98D57004034000).
(7)
TORQUE the outer ring (1) to between 4.5 and 5.0 m.daN (33.18 and
36.87 lbf.ft).
(8)
Install the spherical bearing (4) in the sleeve bearing (3).
(9)
Make sure that the SEALANTS (Material No. 09-018) or SEALANTS
(Material No. 09-019) does not touch the internal surfaces of the
spherical bearing (4).
(10)
Make sure that the SEALANTS (Material No. 09-018) or SEALANTS (Material No. 09-019) does not touch the threads of the inner ring
(5) or the sleeve bearing (3).
(11)
Install the inner ring (5) in the sleeve bearing (3), using the applicable tool as follows:
-
for the flap track beams 2 and 3, use the R/I TOOL FLAP BEARING (98D57004033000).
-
for the flap track 4, use the R/I TOOL FLAP BEARING
(98D57004034000).
(12)
TORQUE the inner ring (5) to between 4.5 and 5.0 m.daN (33.18 and
36.87 lbf.ft).
(13)
Safety the outer ring (1) and the inner ring (5) together with MISCELLANEOUS (Material No. 19-010) around the outboard face of the flap structure (2).
(14)
Apply SEALANTS (Material No. 09-002) to the parts that follow:
-
the interface of the outer ring (1) and the flap structure (2)
-
the interface of the sleeve bearing (3) and the flap structure (2).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 57-26-15Page 414 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
Subtask 57-26-15-410-050
C. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Install the applicable flap track beam: - for the flap track beam 2 (Ref. TASK 57-51-33-400-002) - for the flap track beam 3 (Ref. TASK 57-51-33-400-003) - for the flap track beam 4 (Ref. TASK 57-51-33-400-004).
(3) Install the applicable fixed fairing access panels (Ref. TASK 57-55-11-400-001): - for flap track 2, install 531AB, 531BB, 631AB, 631BB - for flap track 3, install 532AB, 532BB, 632AB, 632BB - for flap track 4, install 533AB, 533BB, 633AB, 633BB.
(4) For the flap track beam 2:
(a) Install the applicable inboard flap (Ref. TASK 27-54-61-400-001).
(5) For the flap track beams 3 and 4:
(a) Install the applicable outboard flap (Ref. TASK 27-54-62-400-001).
R **ON A/C 301-399,
R Subtask 57-26-15-420-050-A
R B. Installation of the Flap Attachment-Bracket Bearing
R (1) For the flap track 2:
R R R (a) Apply SEALANTS (Material No. 09-018) or SEALANTS (Material No. 09-019) to the mating surfaces of the new bearing assembly (1) , the new nut (4) and the flap structure (2).
R (2) For the flap track 3:
R R R (a) Apply SEALANTS (Material No. 09-018) or SEALANTS (Material No. 09-019) to the mating surfaces of the new bearing assembly (1), the new nut (4) and the flap structure (2).
R (3) For the flap track 4:
R (a) Apply SEALANTS (Material No. 09-018) or SEALANTS (Material No.
R 09-019) to the mating surfaces of the new bearing assembly (1),
R the new nut (4) and the flap structure (2).
R (4) Make sure that the SEALANTS (Material No. 09-018) or SEALANTS
R (Material No. 09-019) does not touch the internal surfaces of the
R bearing assembly (1).
R (5) Carefully install the bearing assembly (1) in the flap structure (2).
R (6) Make sure that the bearing assembly (1) is fully engaged in the flap
R structure (2). structure (2).
R (7) Make sure that the SEALANTS (Material No. 09-018) or SEALANTS
R (Material No. 09-019) does not touch the internal surfaces of the
R bearing assembly (1).
R (8) Make sure that the SEALANTS (Material No. 09-018) or SEALANTS
R (Material No. 09-019) does not touch the threads of the nut (4) or
R the bearing assembly (1).
R (9) For the flap track 2:
R (a) Install the new washer (3).
R (10) For the flap track 3:
R (a) Install the new washer (3).
R (11) For the flap track 4:
R (a) Install the new washer (3).
R (12) Install the nut (4), using the applicable tool as follows:
R - for the flap track beams 2 and 3, use the R/I TOOL FLAP BEARING
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM WINGS 机翼2(56)
