A320飞机维护手册 AMM WINGS 机翼2(53)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 (3) Put the access platform below the applicable wing trailing edge at flap tracks 2, 3 and 4, zones 531(631), 532(632) and 533(633).
 (4) Remove the applicable fixed fairing access panels (Ref. TASK 57-55-11-000-001): - for flap track 2, remove 531AB, 531BB, 631AB, 631BB - for flap track 3, remove 532AB, 532BB, 632AB, 632BB - for flap track 4, remove 533AB, 533BB, 633AB, 633BB.
 (5) Remove the applicable flap track beam: - for the flap track beam 2 (Ref. TASK 57-51-33-000-002) - for the flap track beam 3 (Ref. TASK 57-51-33-000-003) - for the flap track beam 4 (Ref. TASK 57-51-33-000-004). 
R  **ON A/C 301-399, 
R  Subtask 57-26-15-010-050-A 
R  B. Get Access 
R  (1) For the flap track beam 2: 
R R  (a) Put the access platform in position below the applicable inboard flap at zone 531(631). 
R  (b) Remove the applicable inboard flap (Ref. TASK 27-54-61-000-003). 
R  (2) For the flap track beams 3 and 4: 
R R  (a) Put the access platform in position below the applicable outboard flap at zone 533(633). 
R  (b) Remove the applicable outboard flap (Ref. TASK 27-54-62-000-002). 
R R  (3) Put the access platform below the applicable wing trailing edge at flap tracks 2, 3 and 4, zones 531(631), 532(632) and 533(633).

 

 **ON A/C ALL
 Subtask 57-26-15-865-050
 C. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/FLP/CTL AND MONG/SYS1 6CV B07 121VU FLIGHT CONTROLS/FLP/CTL AND/MONG/SYS2 8CV Q21
 4. Procedure
_________

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 (Ref. Fig. 401/TASK 57-26-15-991-001)
 **ON A/C 301-399,
 (Ref. Fig. 401A/TASK 57-26-15-991-001-A)
 **ON A/C ALL
 CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING
_______
 EDGE:

 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.

 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.

 -MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.

 Flap Track Beams 2, 3 and 4 - Attachment Bearing
 Figure 401/TASK 57-26-15-991-001

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 57-26-15Page 405 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1R Flap Track Beams 2, 3 and 4 - Attachment Bearing R Figure 401A/TASK 57-26-15-991-001-A

R 1EFF : 301-399, 1 57-26-15Page 406 1 1 May 01/04 1 1 1CES 1

 

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,

 Subtask 57-26-15-020-050
 A. Removal of the Flap Beam Attachment-Bracket Bearing
 (1)
 Remove and discard the lockwire from the outer ring (1) and the inner ring (5).

 (2)
 Remove the outer ring (1) and the inner ring (5), using the applicable tool as follows:

 -
for the flap track beams 2 and 3, use the R/I TOOL FLAP BEARING (98D57004033000).

 -
for the flap track beam 4, use the R/I TOOL FLAP BEARING (98D57004034000).

 

 (3)
 Remove the spherical bearing (4) and carefully remove the sleeve bearing (3).

 **ON A/C 301-399,
 Subtask 57-26-15-020-050-A
 A. Removal of the Flap Beam Attachment-Bracket Bearing
 (1)
 Release the washer (3).

 (2)
 Remove the nut (4), using the applicable tool as follows:

 -
for the flap track beams 2 and 3, use the R/I TOOL FLAP BEARING (98D57004033000)

 -
for the flap track beam 4, use the R/I TOOL FLAP BEARING (98D57004034000).

 

 (3)
 Discard the nut (4).

 (4)
 Remove and discard the washer (3).

 (5)
 Carefully remove and discard the bearing assembly (1).

 

R **ON A/C ALL

 TASK 57-26-15-400-001
 Installation of the Flap-Tracks Attachment-Bracket Bearing
 CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.

 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.

 -MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM WINGS 机翼2(53)