EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-21-05
ALL ú ú N01 Page 603 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
MAIN OIL FILTER PRESSURE RELIEF VALVE - REMOVAL/INSTALLATION
____________________________________________________________
1. General
_______
A. This procedure removes and installs the pressure relief valve for the main oil filter.
B. The pressure relief valve is installed on the forward side of the housing for the main oil filter. The housing is attached to the forward face of the main gearbox at the 8 o'clock position.
C. You can get access to the pressure relief valve through the left thrust reverser half.
NOTE: For engines with PW SB 72-525 (Dual Element Oil Filter),
____ see AMM 79-21-05/401 for removal and installation of the pressure relief valve.
TASK 79-21-06-004-001-N00
2. Remove the Main Oil Filter Pressure Relief Valve (Fig. 401)
________________________________________________
A. Standard Tools and Equipment
(1)
Container - 5 U.S. gallon (20 liter) capacity, used to catch the oil
B.
References
(1)
78-31-00/201, Thrust Reverser System
(2)
IPC 79-21-06 Fig. 1
C.
Access
(1)
Location Zone 412 Engine 1 - Main Gearbox Fwd Face 8 o'clock 422 Engine 2 - Main Gearbox Fwd Face 8 o'clock 432 Engine 3 - Main Gearbox Fwd Face 8 o'clock 442 Engine 4 - Main Gearbox Fwd Face 8 o'clock
(2)
Access Panel
415 Left Thrust Reverser Half - Engine 1
425 Left Thrust Reverser Half - Engine 2
435 Left Thrust Reverser Half - Engine 3
445 Left Thrust Reverser Half - Engine 4
D.
Procedure
(1)
Open the left thrust reverser half (Ref 78-31-00/201).
S 014-002-N00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-21-06
ALL ú ú N01 Page 401 ú Feb 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
SEE A
FUEL/OIL COOLER (REF)
GEARBOX MAIN (REF)
1. PACKING 3. PACKING MAIN OIL FILTER HOUSING
2. RELIEF VALVE FILTER PRESSURE MAIN OIL
FWD
A
Main Oil Filter Pressure Relief Valve Installation Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-21-06
ALL ú ú N01 Page 402 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 494-003-N00
WARNING: BEFORE YOU OPEN THE OIL TANK CAP, PERMIT A MINIMUM OF FIVE
_______ MINUTES AFTER ENGINE SHUTDOWN TO LET THE PRESSURE IN THE OIL TANK BLEED OFF. A FAST FLOW OF HOT OIL CAN OCCUR AND CAUSE INJURY TO YOU.
DO NOT KEEP THE OIL ON YOUR SKIN FOR A LONG TIME. IF YOU DO NOT CLEAN THE OIL OFF, THE OIL CAN CAUSE INJURY.
(2)
Put the container below the pressure relief valve (2) to catch the remaining oil.
S 024-004-N00
(3)
Remove the pressure relief valve (2) from the housing of the main oil filter.
(a) Discard the packing (1, 3).
TASK 79-21-06-404-005-N00
3. Install the Main Oil Filter Pressure Relief Valve (Fig. 401)
_________________________________________________
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:747-400 AMM 飞机维护手册 滑油 OIL(58)