79-31-01
ALL ú ú N01 Page 407 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
S 434-019-N00
(11)
Connect the cooling air tube (2) to the union (3) on the heat shield (4).
(a)
Tighten the tube nut for the cooling air tube (2).
S 434-020-N00
(12)
Connect the electrical connector DT675 (5) to the oil quantity transmitter (7).
F.
Put the Airplane Back to Its Usual Condition.
S 414-039-N00
WARNING: OBEY THE INSTRUCTIONS IN AMM 78-31-00/201 WHEN YOU CLOSE THE
_______ THRUST REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS, INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT CAN OCCUR.
(1)
Close the left thrust reverser (AMM 78-31-00/201).
S 414-034-N00
(2)
Close the left core cowl panel (AMM 71-11-06/201).
S 414-035-N00
(3)
Close the left fan cowl panel (AMM 71-11-04/201).
S 444-036-N00
(4)
Do the activation procedure for the thrust reverser
(AMM 78-31-00/201).
S 864-022-N00
(5)
Remove the DO-NOT-CLOSE tags and close these circuit breakers as follows:
(a)
P7 Overhead Circuit Breaker Panel
1) 7F9 EIU L
2) 7F10 EIU C
3) 7F15 EIU R
(6)
Fill the engine oil tank, if it is necessary (AMM 12-13-03/301).
S 714-024-N00
(7)
Do the operational test for the oil quantity indicating system (AMM 79-31-00/501).
S 614-023-N00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-31-01
ALL ú ú N01 Page 408 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 794-025-N00
(8) Examine the oil quantity transmitter (7) for oil leakage after the engine shutdown.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-31-01
ALL ú ú N01 Page 409 ú Jun 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
OIL PRESSURE INDICATING SYSTEM - DESCRIPTION AND OPERATION
__________________________________________________________
1. General
_______
A. The engine oil pressure indicating system includes an oil pressure transmitter and uses the auxiliary EICAS for display. The oil pressure transmitter measures the pressure after the fuel/oil cooler and before the engine oil goes to the engine bearings. The pressure signal is sent to the EFIS/EICAS interface units (EIU's) which shows the oil pressure on the auxiliary EICAS display in the flight compartment.
2. Oil Pressure Transmitter (Fig. 1)
________________________
A. The oil pressure transmitter is installed on the left side of the engine just aft of the intermediate case at the 10 o'clock position.
B. The oil pressure transmitter has a variable reluctance type. It includes a pressure sensor and an electrical transformer with a movable core. A diaphragm in the pressure sensor is mechanically coupled to the transformer core. The diaphragm senses the pressure changes.
3. Oil Pressure Indication (Fig. 2)
_______________________
A. The oil pressure indication is shown on the auxiliary EICAS display. For more data on the oil pressure indication, refer to Integrated Display System, 31-61-00/001.
B. The display shows oil pressure in psi on a digital readout.
4. Operation (Fig. 3)
_________
A. Functional Description
(1)
The system is operational when 28 volts ac power is applied to the oil pressure transmitter.
(2)
The oil pressure transmitter senses oil pressure by a diaphragm in the transmitter pressure sensor. The diaphram position is relative to the oil pressure versus breather air pressure from the main bearing compartment.
(3)
Signals proportional to the pressure are generated by the oil pressure transmitter through the reluctance change between the windings of the transformer.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 滑油 OIL(111)
