NWS1A-4
NWS1B-4
NWS1A-2 LH
CABLE DRUMS CABLE(INBOARD GROOVE) COMPENSATORNWS1B-2 RH ASSEMBLY(OUTBOARD GROOVE)
NWS1A-3 LH A NWS1B-3 RH
TRUNNION PIVOT LINK
NWS2A-1
(FORWARD
GROOVE) NWS2B-1 (AFT GROOVE)
FWDNWS2B-2 (SAME CABLE VIEW LOOKING DOWN AND AFT
NWS2A-2AS NWS2A-2)
B
FWD
A-A
Nose Wheel Steering System Control Cables Figure 7 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-00-40
ALL ú ú 01 Page 16 ú Oct 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
REF CABLE REQ NO. INCH) 2 (TO NEAREST TENTH LENGTH 2FITTINGS
1 2
NWS1A-1 1 249.8 MS21260L3RH BACT14A3
NWS1A-2 1 22.5 MS21260S3RH BACT14A3
NWS1A-3 1 40.5 MS21260S3LH BACT14A3
NWS1A-4 1 122.2 MS21260L3LH BACT14A3
NWS1B-1 1 341.7 MS21260L3LH BACT14A3
NWS1B-2 1 22.5 MS21260S3RH BACT14A3
NWS1B-3 1 114.7 MS21260S3LH BACT14A3
NWS1B-4 1 148.0 MS21260L3RH BACT14A3
NWS2A-1 1 28.0 MS21260S3RH BACT14A3
NWS2A-2 1 1122.7 MS21260S3LH MS21260S3RH
NWS2B-1 1 27.8 MS21260S3LH BACT14A3
NWS2B-2 1
CABLE SIZE - 3/32 7 X 7
MS21260 BACT14A
BACC2C CABLE
MS21260S3LH BACT14B3 BALL
MS21260S3RH
NWS2A-2 AND NWS2B-2 ARE ONE CONTINUOUS CABLE.
REFERENCE ONLY. FOR SPECIFIC PART NUMBER, LENGTH, MATERIAL, AND END FITTING, REFER TO CURRENT IPC.
Nose Wheel Steering System Control Cables
Figure 7 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-00-40
ALL ú ú 01 Page 17 ú Oct 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
DOUBLER
NOTE: LEFT HAND SHOWN RIGHT HAND OPPOSITE.
Brake Cable Air Pressure Seal Locations
Figure 8
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-00-40
ALL ú ú 01 Page 18 ú Oct 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SEE A
SHIELD AND COVER
CABLE LGV1B PULLEY
STA 1372 AIR PRESSURE SEALS RISER BLOCK RISER BLOCK CABLE LGV1A FWD
PRESSURE DECK RBL 120
WL 186.3
A
Landing Gear Control Cable Air Pressure Seal Location Figure 9
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-00-40
ALL ú ú 01 Page 19 ú Oct 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
LANDING GEAR LUBRICATION RETAINER - REPAIR
__________________________________________
1. General_______
A. This procedure contains a task to repair the lubrication retainers for the landing gear.
B. The task gives steps to install the alternate lubrication fittings in the nylon lubrication retainers. The retainers are in the holes of the landing gear joints.
TASK 32-00-50-308-001
2. Landing Gear Lubrication Retainer Repair (Fig. 801)________________________________________
A. Access
(1)
Location Zone
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 起落架 LANDING GEAR 1(39)
