曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
F. Leading Edge Slat Removal
SUBTASK 27-81-21-020-001
(1) Disconnect the slat actuator [9] from the leading edge slat assembly [17] (Figure 401):
(a) Remove the bolt retainer [18] from the slat assembly [17]:
1) Remove the bolts [15] and washers [16] that attach the bolt retainer [18] to the slat
assembly [17].
2) Remove the bolt retainer [18] from the slat assembly [17].
WARNING: MAKE SURE YOU HOLD THE LEADING EDGE SLAT IN ITS POSITION. THE
LEADING EDGE SLAT CAN FALL TO THE FULL EXTEND POSITION. THIS CAN
CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(b) Hold the slat assembly [17] while you remove the nut [12], washer [11], bushing [10],
washer [19], and bolt [20].
SUBTASK 27-81-21-980-001
(2) Carefully let the slat assembly [17] move down to the full extend position.
SUBTASK 27-81-21-860-003
(3) Use hydraulic power to retract the slat actuator [9]. To retract the slat actuator [9], do this task:
Leading Edge Flaps and Slats Retraction, TASK 27-81-00-860-804.
NOTE: The slat actuator [9] can hang from the upper fitting.
SUBTASK 27-81-21-040-001
(4) Do this task: Deactivate the Leading Edge Flaps and Slats, TASK 27-81-00-040-801.
SUBTASK 27-81-21-480-006
(5) If you use the sling, SPL-2041 to help with the removal of the leading edge slat assembly [17], do
these steps to install the sling, SPL-2041 on the leading edge slat assembly [17] (Figure 402):
(a) Attach the wedges [69] on the trailing edge of the leading edge slat assembly [17] where
they will line up with the main tracks.
(b) Attach the strap assembly [61] to the bottom of the leading edge slat assembly [17] with
screws [64], washers [65] and nuts [66].
(c) Attach the end fittings [63] to the leading edge slat assembly [17] with screws [67] and
washers [68].
(d) Attach the strap assembly [61] to the end fittings [63], wedges [69] and spreader bar [62].
SUBTASK 27-81-21-480-007
(6) Connect the overhead hoist to the sling, SPL-2041.
SUBTASK 27-81-21-020-003
(7) Remove the leading edge slat assembly [17] (Figure 401):
(a) Disconnect the auxiliary arms [28] from the auxiliary tracks [29]:
1) Remove the pin [40], nuts [41], washer [42], targets [43], spacers [48], detent arm roller
bearings [45], washers [47] and bolts [46].
2) Move the auxiliary arms [28] away from the auxiliary tracks [29].
3) Remove the auxiliary arm roller bearings [44] from the auxiliary tracks [29].
(b) Remove the main tracks [21] from the fixed leading edge:
1) Manually move the slat until downstops [22] on the main tracks [21] align with the
access holes in the track ribs.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-81-21
Page 406
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
2) Remove the nuts [27], washers [23], downstops [22], stop locators [26], sleeve [25], and
bolts [24].
(c) Carefully move the leading edge slat assembly [17] forward until the main tracks [21] are
clear of the roller ribs.
(d) Remove the leading edge slat assembly [17].
SUBTASK 27-81-21-020-004
(8) If you remove slats No. 2, 3, 4, 5, 6 or 7, disconnect the thermal anti-icing duct from the slat
assembly [17]. To remove the duct, do this task: Wing Anti-Ice Telescoping Duct Seal
Removal, TASK 30-11-31-000-801.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-81-21
Page 407
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Leading Edge Slat Installation
Figure 401 (Sheet 1 of 5)/27-81-21-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-81-21
Page 408
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Leading Edge Slat Installation
Figure 401 (Sheet 2 of 5)/27-81-21-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-81-21
Page 409
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Leading Edge Slat Installation
Figure 401 (Sheet 3 of 5)/27-81-21-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-81-21
Page 410
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Leading Edge Slat Installation
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
737-600-700-800-900 飞机维护手册7 AIRCRAFT MAINTENANCE MANUA(72)
