Normal Contacts - P/N Characteristics
E0395, E0396 and NSA938402
Figure 001
20-48-21 Page 2
Normal Contacts - P/N Characteristics
E0395, E0396 and NSA938402
Figure 002
20-48-21 Page 3
Normal Contacts - Insertion/Extraction Tools
E0395, E0396 and NSA938402
Figure 003
20-48-21 Page 4
R Dummy Contacts - Insertion/Extraction Tools E0397 Figure 004
20-48-21 Page 5
Dummy Contacts - Insertion/Extraction Tools
E0380
Figure 005
20-48-21 Page 6
D. Wire Stripping
(Ref. Fig. 006, 007)
(1) Normal wire If sealing is necessary, install the heat-shrinkable sleeve on the wire before stripping. Shrinking is made after crimping.
R Strip the cable to the length "E".
(2) Special wires
E0437DL22 and DL20
NSA935132DJ20
(a)
Remove the fiberglass braid then the PTFE envelope over a length of 50 mm (1.9685 in.).
(b)
Strip the core cable over a length of 35 mm (1.3779 in.).
(c)
Install the heat shrinkable sleeve in order to cover the outer sheath over 10 mm (0.3937 in.) and shrink.
(d)
Strip the core cable recovered by the heat shrinkable sleeve at the normal length "E".
E. Crimping Procedure and Tools
(Ref. Fig. 008, 009)
(1)
Engage the stripped wire in the pin/socket.
(2)
Make sure that you can see the wire conductor through the inspection hole.
(3)
Install the pin/socket contact in the positioner.
(4)
Fully close the tool handles until the safety ratchet releases.
(5)
Remove the crimped contact.
(6)
If necessary, heat shrink the sleeve.
20-48-21 Page 7
Normal Contacts - Wire Stripping and Sleeves Shrinking
E0395, E0396 and NSA938402
Figure 006
20-48-21 Page 8
Normal Contacts - Wire Stripping
E0395, E0396 and NSA938402
Figure 007
20-48-21 Page 9
R Normal Contacts - Crimping Tools E0395 and E0396 Figure 008
20-48-21 Page 10
Normal Contacts - Crimping Tools
NSA938402
Figure 009
20-48-21 Page 1120-48-21 Page 12
______________________________________________________________________3. Connection Procedure for Contacts NSA938151, NSA938152, EN3155-018 and EN3155-019. 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址:A320 ESPM Electrical Standard Practices Manual 4(25)