(2)
Open the emergency exit door (Ref. TASK 52-22-00-010-001) or (Ref. TASK 52-22-00-010-002).
(3)
Remove the door lining panel 833CZ (Ref. TASK 25-23-47-000-004) or 843CZ (Ref. TASK 25-23-47-000-009) or 834CZ, 844CZ, (Ref. TASK 25-23-47-000-010).
4. Procedure
_________
(Ref. Fig. 401/TASK 56-31-15-991-001) Subtask 56-31-15-020-050
A. Remove the window.
(1) Remove the retainer attach screws (1), the washers (2) and the retainer (3).
NOTE : Do not damage the protective surfaces of the retainer.
____
(2)
Remove the window assembly (4) from the window frame (5). NOTE : You must wear cotton gloves when you touch the window panes,
____
components and assemblies.
(3)
If you must disassemble the window assembly (4), you must do the subsequent:
(a)
Remove the outer pane (6) from the rubber seal (7).
(b)
Remove the inner pane (8) from the rubber seal (7). NOTE : Put the window panes on a soft, lint-free cloth.
____
1EFF : 301-399, 1 56-31-15Page 402 1 1 May 01/04 1 1 1CES 1
INTENTIONALLY BLANK
1 1
56-31-15Page 403
1 1 May 01/04 1 1 1CES 1
Window - Emergency Exit Door Figure 401/TASK 56-31-15-991-001- 12 (SHEET 1)
1EFF : 301-399, 1 56-31-15Page 404 1 1 May 01/04 1 1 1CES 1
Window - Emergency Exit Door Figure 401/TASK 56-31-15-991-001- 22 (SHEET 2)
1EFF : 301-399, 1 56-31-15Page 405 1 1 May 01/04 1 1 1CES 1
TASK 56-31-15-400-001
Installation of the window in the Emergency Exit Door - Doors 2/3
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific chamois leather
No specific cotton gloves
No specific lint-free cloth
No specific sponge
No specific access platform 3 m (9 ft. 10 in.)
R No specific Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-010
PLASTIC CLEANER (Ref. 20-31-00)
1EFF : 301-399, 1 56-31-15Page 406 1 1 May 01/05 1 1 1CES 1
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 12-21-12-100-001 Cleaning of the Cockpit Display-Units 25-23-47-000-004 Removal of the Door Frame Linings of the LH FWD Emergency Exit Door, zone 231 25-23-47-000-009 Removal of the Door Frame Linings of the RH FWD Emergency Exit Door, zone 232 25-23-47-000-010 Removal of the Door Frame Linings of the LH/RH AFT Emergency Exit Doors, zones 251/252. 25-23-47-400-004 Installation of the Door Frame Linings of the LH FWD Emergency Exit Door, zone 231 25-23-47-400-009 Installation of the Door Frame Linings of the RH FWD Emergency Exit Door, zone 232 25-23-47-400-010 Installation of the Door Frame Linings of the LH/RH AFT Emergency Exit Doors, zones 251/252. 52-22-00-010-001 Opening of the Emergency Exit Doors from the
Passenger Compartment 52-22-00-010-002 Opening of the Emergency Exit Doors from the Outside 52-22-00-410-001 Closing of the Emergency Exit Doors from the
Passenger Compartment 52-22-00-410-002 Closing of the Emergency Exit Doors from the Outside 56-21-13-100-002 Cleaning the Outer Surface of the Outer Window Panes 56-31-15-991-001 Fig. 401
3. Job Set-up
__________
Subtask 56-31-15-860-050
A. Aircraft Maintenance Configuration
(1)
Make sure that the access platform is in position.
(2)
Make sure that the emergency exit door is open (Ref. TASK 52-22-00-010-001) or (Ref. TASK 52-22-00-010-002).
(3)
Make sure that the door lining is removed (Ref. TASK 25-23-47-000-004) or (Ref. TASK 25-23-47-000-009) or (Ref. TASK 25-23-47-000-010).
1EFF : 301-399, 1 56-31-15Page 407 1 1 May 01/05 1 1 1CES 1
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM WINDOWS 风挡 窗户(99)