(2)
Install the upper sidewall panels (Ref. TASK 25-23-43-400-001).
(3)
Make sure that the work area is clean and clear of tool(s) and other items.
(4)
Remove the access platform(s).
(5)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 56-21-13Page 613 1 1 May 01/04 1 1 1CES 1
Damage Limits of the Retainers
Figure 606/TASK 56-21-13-991-003
1EFF : ALL 1 56-21-13 Page 614
1 1 May 01/04
1 1
1CES 1
WINDOW - CABIN - CLEANING/PAINTING
__________________________________
TASK 56-21-13-100-002
Cleaning the Outer Surface of the Outer Window Panes
NOTE : You must not use a dry cloth to clean the window panes. A dry cloth can
____ scratch the surface of the window panes and cause the build-up of static electrical charges.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific boiled glove cloth
No specific chamois leather.
No specific access platform 3 m (9 ft. 10 in.)
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 05-010 PLASTIC CLEANER (Ref. 20-31-00) Material No. 11-001 USA MIL-D-16791 TYPE I R DETERGENT (Ref. 20-31-00)
3. Job Set-up
__________
Subtask 56-21-13-941-050
A. Get Access
(1) Put the access platform in position.
1EFF : ALL 1 56-21-13Page 701 1 1 May 01/99 1 1 1CES 1
4. Procedure
_________
Subtask 56-21-13-160-050
A. Clean the window panes with a large quantity of warm water.
(1)
Make sure that the window panes are free from abrasive particles.
(2)
Mix the CLEANING AGENTS (Material No. 11-001) and water to make a mild cleaning solution.
CAUTION : USE ONLY THE SPECIFIED MATERIALS AND OBEY THE INSTRUCTIONS
_______ FROM THE MANUFACTURERS. OTHER MATERIALS CAN CAUSE DAMAGE TO THE SURFACE PROTECTION OF THE COMPONENTS AND THE RELATED AREA.
(3)
Wash the window panes with the mild cleaning solution and a boiled glove cloth or a chamois leather.
(4)
Rinse the window panes with a large quantity of warm water.
(5)
Dry the window panes with the chamois leather.
(6)
If stains or dirty marks remain:
(a)
Clean the window panes with the SPECIAL MATERIALS (Material No. 05-010) and a boiled glove cloth.
(b)
Rinse the window panes with a large quantity of warm water.
(c)
Dry the window panes with the chamois leather.
5. Close-up
________ Subtask 56-21-13-942-050
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the access platform(s).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 56-21-13Page 702 1 1 Feb 01/98 1 1 1CES 1
WINDOW - CABIN - REPAIRS
________________________
TASK 56-21-13-000-002 Removal of the Window Frame Eyebolt
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-23-43-000-001 Removal of the Upper Sidewall Panel(s) 56-21-13-000-001 Removal of the Cabin Window ASRM 51421100 56-21-13-991-007 Fig. 801
3. Job Set-up
__________ Subtask 56-21-13-010-053
A. Get Access
(1)
Remove the upper sidewall panels, as necessary (Ref. TASK 25-23-43-000-001).
(2)
Remove the window assembly (Ref. TASK 56-21-13-000-001).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM WINDOWS 风挡 窗户(91)
