A320飞机维护手册 AMM WINDOWS 风挡窗户(34)_航空信息_民用航空_通用航空

(2)
Apply the product with circular movements on all the surface and insist where there are streaks, marks and dirt.

(3)
Let the product dry, and remove it with MISCELLANEOUS (Material No. 19-003).

5. Close-up
________
Subtask 56-11-11-210-053

A. Inspection of the Wipers
(1) Make sure that the wipers are in the correct condition and replace if necessary (Ref. TASK 30-45-53-000-001) and (Ref. TASK 30-45-53-400-001).
Subtask 56-11-11-865-054
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s): R 1DG1, 1DG2, 4DG1, 4DG2, 5DG1, 5DG2, 5SQ1, 5SQ2.
Subtask 56-11-11-942-057
C. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.

(2)
Remove the access platform(s).

1EFF : ALL 1 56-11-11Page 809 1 1 May 01/05 1 1 1CES 1

WINDOW - FIXED (7DG1,7DG2) - REMOVAL/INSTALLATION
_________________________________________________
R **ON A/C 051-099,
R TASK 56-11-12-000-001-A
R Removal of the Fixed Windows
R WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE_______
R OPENED, SAFETIED AND TAGGED.
R 1. Reason for the Job__________________
R This procedure is applicable to the glass windows (SPS supplier, P/N
R SPS...).
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific blanking caps
R No specific circuit breaker(s) safety clip(s)
R No specific access platform 4.50 m (14 ft. 9 in.)
R B. Referenced Information
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 56-11-12-991-023 Fig. 401
R 56-11-12-991-024 Fig. 402
R 3. Job Set-up__________
R Subtask 56-11-12-941-053
R A. Get Access
R (1) Put the access platform in position in the zone 210 in front of the
R fixed window.

1EFF : ALL 1 56-11-12Page 401 1 1 May 01/05 1 1 1CES 1

R Subtask 56-11-12-865-053

R B. Open, safety and tag this(these) circuit breaker(s):
R -------------------------------------------------------------------------------
R PANEL DESIGNATION IDENT. LOCATION
R -------------------------------------------------------------------------------
R 121VU COM NAV/RADAR/2 5SQ2 K14
R 121VU COM NAV/RADAR/1 5SQ1 K13
R FOR 7DG1
R 122VU ANTI ICE/WINDOWS/L 4DG1 X14
R 122VU ANTI ICE/WHC/1 5DG1 X13
R 123VU ANTI ICE/L/WHSLD 1DG1 AF10
R FOR 7DG2
R 122VU ANTI ICE/WINDOWS/R 4DG2 W14
R 122VU ANTI ICE/WHC/2 5DG2 W13
R 123VU ANTI ICE/R/WHSLD 1DG2 AF03
R 4. Procedure_________
R Subtask 56-11-12-020-051
R A. Removal of the Fixed Window Panel
R (Ref. Fig. 401/TASK 56-11-12-991-023, 402/TASK 56-11-12-991-024)
R WARNING : BE CAREFUL DURING THE REMOVAL/INSTALLATION OF THE WINDOW TO_______
R PREVENT INJURY TO PERSONS AND/OR DAMAGE. MAKE SURE THAT: -THERE
R ARE SUFFICIENT PERSONS FOR THE TASK. -YOU DO NOT CAUSE DAMAGE
R TO THE SEAL OR THE GLASS PLIES. THE WINDOW IS HEAVY.
R (1) Removal of the lining panel (8).
R (a) Remove the lateral lining panel
R 1_ FOR 7DG1
R Remove the screws (3), loosen the fasteners (4) and remove the
R panel (5).
R 2_ FOR 7DG2
R Loosen the fasteners (1) and remove the panel 212KW.
R (b) Remove the screws (6) and the washers (7).
R (c) Loosen the fasteners (2).
R (d) Remove the lining panel (8).