• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 08:58来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 -
for the glass windows (SPS supplier, P/N SPS...).


 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific hand-held magnifying glass
 No specific light source
 No specific metal scale 150 mm (5.9 in.) long
 No specific access platform 4.50 m (14 ft. 9 in.)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
56-10-00-110-003 Cleaning of the L/R Sliding Windows 56-10-00-200-004 Measurement of Scratch Depth with MITUTOYO Surface Tester SJ201
 **ON A/C 001-049, 101-105, 151-199, 201-220,
 56-12-11-991-082 Fig. 609
R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 614 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1


 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------

R **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499,
 56-12-11-991-048 56-12-11-991-049 56-12-11-991-050 56-12-11-991-051 56-12-11-991-052 56-12-11-991-053 56-12-11-991-054 56-12-11-991-055 56-12-11-991-056 56-12-11-991-057 56-12-11-991-058 56-12-11-991-059 56-12-11-991-060 56-12-11-991-061 56-12-11-991-062 56-12-11-991-063 56-12-11-991-064
3. Job Set-up
__________
 Subtask 56-12-11-941-065
 A. Get AccessFig. 610Fig. 611Fig. 612Fig. 613Fig. 614Fig. 615Fig. 616Fig. 617Fig. 618Fig. 619Fig. 620Fig. 621Fig. 622Fig. 623Fig. 624Fig. 625Fig. 626
 (1)
 Put an access platform in position at zone 210.

 (2)
 Clean the sliding windows (Ref. TASK 56-10-00-110-003).


R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 615 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1 Subtask 56-12-11-865-072


 B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU COM NAV/RADAR/1 5SQ1 K13 122VU ANTI ICE/WINDOWS/R 4DG2 W14 122VU ANTI ICE/WHC/2 5DG2 W13 122VU ANTI ICE/WINDOWS/L 4DG1 X14 122VU ANTI ICE/WHC/1 5DG1 X13 123VU ANTI ICE/L/WHSLD 1DG1 AF10 123VU ANTI ICE/R/WHSLD 1DG2 AF03
 4. Procedure
_________
 Subtask 56-12-11-210-064
 A. Inspection of the Sliding Window Seal
 (1)
 Make sure that there are no cracks and blisters on the seal.

 (2)
 Make sure that the surface of the seal that touches the windows is not damaged.


 Subtask 56-12-11-220-064
 B. Inspection of the Sliding Windows
 (1) Inspection of the acrylic sliding windows (LUCAS/ACT supplier, P/N NH...)
 NOTE : "Impaired": in inspection tables , the word "impaired" refers
____ to visibility. Visibility is "impaired" when defects have an effect on visibility. If visibility is "impaired", you must replace the window panel.
 (a) Do an inspection of the acrylic sliding windows for:
 1 Cracks
_ (Ref. Fig. 610/TASK 56-12-11-991-048)
 2 Scratches
_ (Ref. Fig. 611/TASK 56-12-11-991-049)
R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 616 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1


 Acrylic Sliding Window - Permitted Damage
 Figure 610/TASK 56-12-11-991-048

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 617 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1


 Acrylic Sliding Window - Permitted Damage
 Figure 611/TASK 56-12-11-991-049

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 618 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1


 3_ Chips
 (Ref. Fig. 612/TASK 56-12-11-991-050)
 4_ Delamination
 (Ref. Fig. 613/TASK 56-12-11-991-051)
 5_ Bubbles
 (Ref. Fig. 614/TASK 56-12-11-991-052)
 6_ Discoloration or burning
 (Ref. Fig. 614/TASK 56-12-11-991-052)
 7_ Transparency
 (Ref. Fig. 614/TASK 56-12-11-991-052)
 8_ Crazing
 (Ref. Fig. 615/TASK 56-12-11-991-053)
 9_ Burn spots.
 (Ref. Fig. 616/TASK 56-12-11-991-054)

 (b) Do a check for burn spots. (Ref. Fig. 617/TASK 56-12-11-991-055)
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM WINDOWS 风挡 窗户(79)