• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 08:58来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者


 Sliding Window Lining
 Figure 417/TASK 56-12-11-991-071

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 485 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 4. Procedure
_________

 Subtask 56-12-11-020-073
 A. Removal of the Sliding Window Panel CAUTION : BE CAREFUL DURING THE REMOVAL/INSTALLATION OF EACH SLIDING
_______ WINDOW PANEL TO PREVENT INJURY TO PERSONS AND /OR DAMAGE. MAKE SURE THAT THERE ARE SUFFICIENT PERSONS DURING THE OPERATION. EACH WINDOW PANEL WEIGHS APPROXIMATELY 20Kg (44.11b).
 (1) Removal of the acrylic windows (LUCAS/ACT supplier, P/N NH...) and glass windows (PPG supplier, P/N NP...). (Ref. Fig. 418/TASK 56-12-11-991-072)
 NOTE : The attachment holes on the periphery of the window panel are
____
 identified by numbers 1 to 63.

 (a)
 Open the sliding window .

 (b)
 Loosen the nuts (30). Do not loosen the nuts at positions 17 and

 18.

 (c)
 Hold the nuts (30) with a WRENCH, REMOVAL - SLIDING WINDOW (98D56103002000) (98D56103002200) and (98D56103002201) at positions 17 and 18, and loosen the screws (32).

 (d)
 Remove the nuts (30) and the screws (32) at positions 28 and 60.

 (e)
 Install 2 locating pins dia. 4.8 mm (0.19 in.), length 50 mm

 (1.96 in.) at positions 28 and 60.

 (f)
 Remove the remaining nuts (30) and screws (32).

 (g)
 Close the sliding window. Use 2 suction cups to hold and move the sliding window panel (31).

 (h)
 Remove the two locating pins at positions 28 and 60 and remove the sliding window panel (31).

 (i)
 Move the frame of the sliding window to the open position (the sliding window panel (31) stays in position in its housing).

 (j)
 Remove the sliding window panel (31) carefully.


R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 486 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1


 Sliding Window Panel (LUCAS/ACT and PPG Suppliers) - Removal/Installation
 Figure 418/TASK 56-12-11-991-072

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 487 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1


 (2) Removal of the glass windows (SPS supplier, P/N SPS...). (Ref. Fig. 419/TASK 56-12-11-991-073)
 NOTE : The attachment holes on the periphery of the window panel are
____
 identified by numbers 1 to 63.

 (a)
 Open the sliding window.

 (b)
 Loosen the screws (30).

 (c)
 Use 2 suction cups to hold and move the sliding window panel (32).

 (d)
 Hold the sliding window panel (31) in position and remove the screws (30) and the washers (31).

 (e)
 Move the frame of the sliding window to the open position (the sliding window panel (32) stays in position in its housing).

 (f)
 Remove the sliding window panel (32) carefully.


R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 488 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1


 Sliding Window Panel (SPS Supplier) - Removal/Installation
 Figure 419/TASK 56-12-11-991-073

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 489 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 TASK 56-12-11-400-002


 Installation of the Sliding Window Panel
 WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______ OPENED, SAFETIED AND TAGGED.
 1. Reason for the Job
__________________
 This procedure is applicable:
 -
to the acrylic windows (LUCAS/ACT supplier, P/N NH...)

 -
to the glass windows (PPG supplier, P/N NP...).

 -
to the glass windows (SPS supplier, P/N SPS...)


 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 2 locating pins dia. 4.8 mm (0.19 in.), length 50 mm
 (1.96
 in.) No specific 2 locating pins dia. 5.5 mm (0.19 in.), length 50 mm

 (1.96
 in.) No specific 2 suction cups No specific dynamometer 25 daN (56.2022 lbf) No specific Torque Wrench : range 0.00 to 1.20 m.daN


 (0.00 to 9.00 lbf.ft) 98D56103002000 1 WRENCH, REMOVAL - SLIDING WINDOW
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM WINDOWS 风挡 窗户(69)