R -------------------------------------------------------------------------------R FIG.ITEM |DESIGNATION |IPC-CSN R -------------------------------------------------------------------------------
R 66 adjustment washer
R 66 adjustment washer
R 67 adjustment washer
R 67 adjustment washer
R 81 lockwasher
R 82 lockwasher
R 83 lockwasher
R 84 lockwasher
R D. Referenced Information
56-12-11 03A-285 56-12-11 03B-285 56-12-11 03A-285 56-12-11 03B-285 56-12-11 02A-185 56-12-11 03B-185 56-12-11 02A-185 56-12-11 03B-185
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R 30-42-00-710-001
R
R 33-12-12-400-002
R 33-12-18-400-001
R
R 56-10-00-110-003
R 56-12-11-410-001
R 56-12-11-991-031
R 56-12-11-991-033
R 56-12-11-991-032
R 56-12-11-991-035
R **ON A/C 051-052,
R 56-12-11-991-036
R **ON A/C 053-099,
R 56-12-11-991-036-A
R **ON A/C 051-058,
R 56-12-11-991-078
Operational Test of the Windshield Anti-Icing and Defogging Installation of the Map Table lights (41LE, 42LE) Installation of the Map Table Light Rheostats (39LE, 40LE) Cleaning of the L/R Sliding Windows Closing of the Cockpit Sliding Windows Fig. 401 Fig. 402 Fig. 403 Fig. 404
Fig. 405
Fig. 405A
Fig. 406
R 1EFF : 051-099, 1 56-12-11Page 410 1 1 May 01/05 1 1 1CES 1
R **ON A/C 051-099,
R 3. Job Set-up__________
R Subtask 56-12-11-869-052
R A. Aircraft Maintenance Configuration
R (1) Make sure that the access platform is in position at zone 211.
R Subtask 56-12-11-865-058
R B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
R tagged
R -------------------------------------------------------------------------------
R PANEL DESIGNATION IDENT. LOCATION
R -------------------------------------------------------------------------------
R 121VU COM NAV/RADAR/2 5SQ2 K14
R 121VU COM NAV/RADAR/1 5SQ1 K13
R FOR 8DG1
R 122VU ANTI ICE/WINDOWS/L 4DG1 X14
R 122VU ANTI ICE/WHC/1 5DG1 X13
R 123VU ANTI ICE/L/WHSLD 1DG1 AF10
R FOR 8DG2
R 122VU ANTI ICE/WINDOWS/R 4DG2 W14
R 122VU ANTI ICE/WHC/2 5DG2 W13
R 123VU ANTI ICE/R/WHSLD 1DG2 AF03
R 4. Procedure_________
R Subtask 56-12-11-420-056
R A. Installation of the Sliding Window
R WARNING : BE CAREFUL DURING THE REMOVAL/INSTALLATION OF THE WINDOW TO_______
R PREVENT INJURY TO PERSONS AND/OR DAMAGE. MAKE SURE THAT: -THERE
R ARE SUFFICIENT PERSONS FOR THE TASK. -YOU DO NOT CAUSE DAMAGE
R TO THE SEAL OR THE GLASS PLIES. THE WINDOW IS HEAVY.
R (Ref. Fig. 403/TASK 56-12-11-991-032)
R (1) Install the sliding window assembly in the rails (53) and (51). Move
R the assembly to the closed position.
R 1EFF : 051-099, 1 56-12-11Page 411 1 1 May 01/05 1 1 1CES 1
R **ON A/C 051-052,
R Subtask 56-12-11-820-052
R B. Adjustment of the Sliding Windows
R (Ref. Fig. 404/TASK 56-12-11-991-035, 405/TASK 56-12-11-991-036)
R (1) Put the sliding window on the frame to get the peripheral clearance
R J4 of 1.4 +1 -1 mm (0.0551 +0.0393 -0.0393 in.).
R (2) Adjustment on the Z axis:
R (a) From points 1 to 11 measure the upper peripheral clearance and
R the lower peripheral clearance. To get the peripheral clearance
R J4 on the Z axis, use the adjustment washer (66) and the
R adjustment washer (67) of the correct thickness, related to the
R roller supports (62) and (71).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM WINDOWS 风挡 窗户(50)
