1EFF : 051-099, 1 56-12-11Page 481 1 1 May 01/05 1 1 1CES 1
R **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499,
TASK 56-12-11-000-002
Removal of the Sliding Window Panel
WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______ OPENED, SAFETIED AND TAGGED.
1. Reason for the Job
__________________
This procedure is applicable:
-
to the acrylic windows (LUCAS/ACT supplier, P/N NH...)
-
to the glass windows (PPG supplier, P/N NP...).
-
to the glass windows (SPS supplier, P/N SPS...).
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps No specific circuit breaker(s) safety clip(s) No specific 2 locating pins dia. 4.8 mm (0.19 in.), length 50 mm
(1.96 in.) No specific 2 suction cups No specific access platform 3.5 m (11 ft. 6 in.) No specific access platform 4.50 m (14 ft. 9 in.) 98D56103002000 1 WRENCH, REMOVAL - SLIDING WINDOW
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-12-12-000-002 Removal of the Map Table Lights (41LE, 42LE) 33-12-18-000-001 Removal of the Map Table Light Rheostats (39LE, 40LE) 52-10-00-010-001 Opening of the Passenger/Crew Door 56-12-11-010-001 Opening of the Cockpit Sliding Windows 56-12-11-991-071 Fig. 417 56-12-11-991-072 Fig. 418 56-12-11-991-073 Fig. 419
R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 482 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
3. Job Set-up
__________
Subtask 56-12-11-941-067
A. Get Access
(1) Put the access platform in position at the zone 210 in front of the sliding window.
Subtask 56-12-11-010-060
B. Get Access
(1)
Put an access platform in position at the FWD passenger/crew door
831.
(2)
Open the FWD passenger/crew door (Ref. TASK 52-10-00-010-001).
Subtask 56-12-11-865-065
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
FOR 8DG1 122VU ANTI ICE/WINDOWS/L 4DG1 X14 122VU ANTI ICE/WHC/1 5DG1 X13 123VU ANTI ICE/L/WHSLD 1DG1 AF10
FOR 8DG2 122VU ANTI ICE/WINDOWS/R 4DG2 W14 122VU ANTI ICE/WHC/2 5DG2 W13 123VU ANTI ICE/R/WHSLD 1DG2 AF03
Subtask 56-12-11-020-071
D. Removal of Component
(1) Remove the map table light (Ref. TASK 33-12-12-000-002).
FOR 8DG1
41LE
FOR 8DG2
42LE
R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 483 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
(2) Remove the map table light rheostats (Ref. TASK 33-12-18-000-001). FOR 8DG1 39LE FOR 8DG2 40LE
Subtask 56-12-11-020-072
E. Removal of the Sliding Window Lining
(Ref. Fig. 417/TASK 56-12-11-991-071)
(1)
Open the sliding window (Ref. TASK 56-12-11-010-001).
(2)
Remove the screw (5) and remove the pencil holder assembly (7).
(3)
Remove the screw (21) and the washer (20).
(4)
Remove the screw (19) and the washer (18).
(5)
Remove the handle (6).
(6)
Remove the screw (9) and the washer (8).
(7)
Remove the screw (15) and the washer (14).
(8)
Close the sliding window.
(9)
Remove the blanking plug (4), remove the screw (3) and the washer (2).
(10)
Remove the screws (11).
(11)
Remove the screws (12).
(12)
Lift the plate (7) and remove the sliding window lining (16).
(13)
Disconnect the electrical connector (10) from the receptacle.
(14)
Put blanking caps on the disconnected electrical connectors.
R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-11Page 484 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM WINDOWS 风挡 窗户(68)
