R Windshield - Removal/Installation Figure 402/TASK 56-11-11-991-002- 22 (SHEET 2)
1EFF : 1 1 1CES ALL 1 111 56-11-11 Page 407 Aug 01/98
(i)
Remove the nut (16), the washer (17) and the icing indicator (26).
(j)
Remove the nuts (11), the washers (10) and the screws (24) and (32).
NOTE : The screws (24) and (32) have different lengths.
____ Mark the position of these screws so that you install them at their correct position.
(k)
Remove the screws (27) and (23) and the washers (25) and (30).
(l)
Remove the front retainer (18).
(m)
Remove the screws (13) and the washers (28).
(n)
Remove the upper and lower retainers (12) and (31).
(2) Remove the fastener that you cannot remove easily
(Ref. Fig. 403/TASK 56-11-11-991-022)
(a) Install the FASTENER REMOVAL TOOL (98A53003500000) for the fasteners you must remove:
1 Install the spacer (30) on the captive nut (37) of a removed
_
fastener.
2 Install the slider on the spacer (30).
_
3 Install the crossbeam (34) on the slider (33).
_
4 Install the pin (32).
_ R 5_Align the spindle (35) with the fastener (36) you must remove. 6 Tighten the pad screw (31).
_
(b)
Remove the related fastener (36).
(c)
Remove the FASTENER REMOVAL TOOL (98A53003500000).
1EFF : ALL 1 56-11-11Page 408 1 1 Aug 01/05 1 1 1CES 1
Use of the Fastener Removal Tool Figure 403/TASK 56-11-11-991-022
1EFF : 1 1R 1CES ALL 1 11 1 56-11-11 Page 409 Aug 01/05
Subtask 56-11-11-020-053
C. Removal of the Windshield Panel (14)
WARNING : BE CAREFUL DURING THE REMOVAL/INSTALLATION OF THE WINDSHIELD TO
_______ PREVENT INJURY TO PERSONS AND/OR DAMAGE. MAKE SURE THAT: -THERE ARE SUFFICIENT PERSONS FOR THE TASK. -YOU DO NOT CAUSE DAMAGE TO THE SEAL OR THE GLASS PLIES. THE WINDSHIELD IS HEAVY.
CAUTION : DO NOT USE A SUCTION CUP TO HOLD THE INNER SURFACE OF THE
_______ WINDSHIELD PANEL IF THE PANEL HAS A SOFT (SELF HEALING) LINER (SUPPLIER SPS).THE SUCTION CUP WILL CAUSE DAMAGE TO THE SOFT LINER. -DO NOT TRY TO REMOVE THE SOFT LINER. THE SOFT LINER IS A PART OF THE WINDSHIELD PANEL.
CAUTION : DO NOT USE SHARP AND/OR METALLIC TOOLS OR OBJECTS TO
_______ REMOVE/INSTALL THE WINDSHIELD. DO NOT USE A LEVER AGAINST THE EDGE OF THE WINDSHIELD BECAUSE IF YOU DO, YOU WILL CAUSE DAMAGE TO THE WINDSHIELD.
(Ref. Fig. 404/TASK 56-11-11-991-014)
(1) Put the INSTALLATION TOOL - FRONT WINDOW PANELS (98D56103001000) in position on the window frame.
NOTE : Two persons are necessary to remove the windshield from its
____
frame.
(2)
Put two wooden shims, dimensions 38mm(1.49in.) x 38mm(1.49in.) x 20mm(0.78in.) in position in the lower part of the windshield frame.
(3)
With the INSTALLATION TOOL - FRONT WINDOW PANELS (98D56103001000) in position on the windshield frame, move the windshield panel (14) against the center post.
(4)
Remove the INSTALLATION TOOL - FRONT WINDOW PANELS (98D56103001000).
(5)
From the cockpit, push the windshield panel (14) with one hand on the
upper section near the center post. R A second person, out of the aircraft, gets the windshield panel (14) R when it moves out of its frame at the center post.
NOTE : If you must install the same windshield panel, put it into its
____ R container at the removal area.
1EFF : ALL 1 56-11-11Page 410 1 1 Aug 01/05 1 1 1CES 1
Windshield - Removal/Installation Figure 404/TASK 56-11-11-991-014
1EFF : 1 1R 1CES ALL 1 11 1 56-11-11 Page 411 Aug 01/05
(6) Remove the windshield panel (14).
1EFF : ALL 1 56-11-11Page 412 1 1 Aug 01/05R 1 1 1CES 1
TASK 56-11-11-400-001
Installation of the Windshield
WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE_______ OPENED, SAFETIED AND TAGGED.
1. Reason for the Job__________________
R R R R R R R R R NOTE : For the windshield removal/installation, there are three tool____ alternatives: - 98D56103001000 - 98F56103000000 - SGSIT01. The tool 98F56103000000 is the newest tool developed by Airbus to make the windshield adjustment easier. This procedure is applicable to the tool 98D56103001000. For SGS tool SGSIT01, the procedure is included in SGS documentation.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM WINDOWS 风挡 窗户(17)
