1EFF : 301-399, 1 56-22-00Page 1 1 1 Aug 01/04 1 1 1CES 1
Cabin Dummy Windows
Figure 001
1EFF : 301-399, 1 56-22-00 Page 2
1 1 May 01/04
1 1
1CES 1
DUMMY WINDOW - CABIN - REMOVAL/INSTALLATION
___________________________________________ TASK 56-22-13-000-001 Removal of the Dummy Window
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 4.0 m (13 ft. 1 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-23-43-000-001 Removal of the Upper Sidewall Panel(s) 56-22-13-991-001 Fig. 401
3. Job Set-up
__________ Subtask 56-22-13-010-050
A. Get Access
(1)
Put the access platform in position.
(2)
Remove the upper sidewall panels, as nessessary (Ref. TASK 25-23-43-000-001).
1EFF : 301-399, 1 56-22-13Page 401 1 1 May 01/04 1 1 1CES 1
4. Procedure
_________
(Ref. Fig. 401/TASK 56-22-13-991-001) Subtask 56-22-13-020-050
A. Removal:
(1)
Remove the nut (3) and the bonding strap (2) from the eyebolt (1).
(2)
Remove the nuts (7).
(3)
Remove the retainer (8).
(4)
Remove the dummy window (4) and the seal (5) from the window frame (6).
1EFF : 301-399, 1 56-22-13Page 402 1 1 May 01/04 1 1 1CES 1
Dummy Windows - Cabin
Figure 401/TASK 56-22-13-991-001
1EFF : 301-399, 1 56-22-13 Page 403
1 1 May 01/04
1 1
1CES 1
TASK 56-22-13-400-002
Installation of the Dummy Window
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
R No specific Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 09-018 USA AMS 3267/3
CORROSION INHIBITING LOW ADHESION SEALANT
(Ref. 20-31-00)
Material No. 11-002 USA MIL-PRF-680
DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT)
(Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
25-23-43-400-001 Installation of the Upper Sidewall Panel(s)
56-22-13-991-001 Fig. 401
1EFF : 301-399, 1 56-22-13Page 404 1 1 May 01/05 1 1 1CES 1
3. Job Set-up
__________
(Ref. Fig. 401/TASK 56-22-13-991-001) Subtask 56-22-13-860-050
A. Aircraft Maintenance Configuration
(1)
Make sure that the aircraft is in the same configuration as for the removal task.
(2)
Clean the window frame (6) with CLEANING AGENTS (Material No. 11-002).
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
SPECIAL MATERIAL.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM WINDOWS 风挡 窗户(93)