• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 08:58来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 (1)
 The sliding window panels are made of several layers of different materials.

 (2)
 A peripheral seal made of silicone elastomer ensures the sealing between the panel and the sliding frame.

 

R **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499,
 C. Sliding Frame
 (1)
 The panel is held in the sliding frame with bolts and nuts.

 (2)
 The lower section of the sliding frame is equipped with a rack. This rack holds the window in its different positions when it is open.


 1EFF : ALL 1 56-12-00Page 2 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 56-12-00Page 3 1 1 May 01/05 1 1 1CES 1


R  **ON A/C 051-099, 
R  C. Sliding Frame 
R  (1) The panels are held in the frame by a bolted retainer. 
R R  (2) The lower section of the sliding frame is equipped with a rack. This rack holds the window in its different positions when it is open. 
R  **ON A/C ALL
 D. Anti-icing and Defogging System The windows are equipped with an anti-icing and defogging system. This system includes a heating element and two sensors. One sensor is used to regulate the temperature. The other one is in standby. The electrical connections are made by a connector installed on the panel.
 E. Opening/Closing Mechanism (Ref. Fig. 002) This mechanism includes an upper mechanism and a lower mechanism.
 (1) The upper mechanism includes: - a forward upper bellcrank which is equipped with a roller - an aft upper bellcrank which is equipped with a hook and a roller. The bellcranks pivot on the frame. The rollers are installed on eccentrics which are used to adjust the flushness. The hook engages on a locking pin which is fixed to the aircraft structure. - a connecting rod between the upper bellcranks.
 (2) The lower mechanism includes: - a forward lower bellcrank which is equipped with a hook and a bogie - an aft lower bellcrank which is equipped with a hook and a bogie. The bellcranks pivot on the frame. The bogies are installed on eccentrics which are used to adjust the flushness. The hooks engage on locking pins which are fixed to the aircraft structure. - a transversal guide roller installed on an eccentric located at the front of the window. This roller guides the transversal movement of the window. - a connecting rod between the two lower bellcranks - an operating lever equipped with an unlocking pushbutton - a spring attached between the aft bellcrank and the frame.

 

 Sliding Window - Panel Assembly
 Figure 001 (SHEET 1)

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-00Page 4 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1


 Sliding Window - Panel Assembly
 Figure 001 (SHEET 2)

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-00Page 5 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1


 Sliding Window - Panel Assembly
 Figure 001 (SHEET 3)

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-00Page 6 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1


 Sliding Window - Panel Assembly
 Figure 001 (SHEET 4)

R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 56-12-00Page 7 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1


R  Sliding Window - Panel Assembly 
R  Figure 001A (SHEET 1) 
R 1EFF :  051-099,  1  56-12-00 Page 8 
1  1  May 01/05
 1  1
 1CES  1

 

R  Sliding Window - Panel Assembly 
R  Figure 001A (SHEET 2) 
R 1EFF :  051-099,  1  56-12-00 Page 9 
1  1  May 01/05
 1  1
 1CES  1

 

 Sliding Window - Opening/Closing Mechanism Figure 002
 1EFF : 1 1R 1CES  ALL  1 11 1 56-12-00 Page 10 May 01/05

 

 The upper and lower mechanisms are interconnected by a gimbal-joint connecting rod.
 1EFF : ALL 1 56-12-00Page 11 1 1 May 01/05 1 1 1CES 1


 3. Operation_________ (Ref. Fig. 003)
 A. Unlocking
 -the operating lever is unlocked by pushing the pushbutton on the lever
 -rotation of the lever towards the rear causes simultaneous rotation of the aft bellcranks through the connecting rods. This disengages the hooks from the locking pins which are fixed to the structure.
 B. Opening
 -when the window is unlocked, the transversal guide roller, located at the front, serves to disengage the window towards the inside of the aircraft.
 -
the self-alignment of the bogies and the transversal guide roller in the longitudinal rail enable the window to move towards the rear

 -
the rack holds the window in its fully or partially open position.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM WINDOWS 风挡 窗户(45)