INTENTIONALLY BLANK
R 1 1
52-35-12Page 413
1 1 Aug 01/01 1 1 1CES 1
Indicator Light 8MJ Figure 402/TASK 52-35-12-991-002- 12 (SHEET 1)
1EFF : 1 1R 1CES ALL 1 11 1 52-35-12 Page 414 Aug 01/01
Indicator Light 8MJ Figure 402/TASK 52-35-12-991-002- 22 (SHEET 2)
1EFF : 1 1R 1CES ALL 1 11 1 52-35-12 Page 415 Aug 01/01
(4) Remove the lamp body (3) from the plate (13) as follows:
(a) Remove the castle nut (15) and the lock washer (12) from the lamp body (3).
NOTE : If necessary, use the SPANNER - WRENCH (98F52308330000):
____
(b)
Remove the the lamp body (3) from the plate (13).
(c)
Remove the lock washer (12) and the castle nut (11) from the lamp body (3).
(d)
Remove the heat-shrink tubing (8) from the wire harness (9) to get access to the soldering terminals of the lamp body (3).
(e)
Make a mark on the wire harness (9) to identify the individual wires.
(f)
Disconnect the wire harness (9) from the terminals of the lamp body (3) with a soldering iron.
1EFF : ALL 1 52-35-12Page 416 1 1 Aug 01/01R 1 1 1CES 1
TASK 52-35-12-400-002
Installation of the Indicator Light 8MJ
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific hot air blower
No specific non metallic scraper
No specific soldering iron
R No specific Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft) 98F52308330000 1 SPANNER - WRENCH
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 07-023 D DAN 1172-01
TRANSPARENT PROTECTIVE COATING (Ref. 20-31-00)
Material No. 09-013 USA MIL-PRF-81733 TYPE I CLASS A
CORROSION INHIBITING BRUSH CONSISTENCY
(Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
6 seal 52-35-04 01A-150 8 heat-shrink tubing 52-35-04 01A-015 10 seal 52-35-04 01A-050
1EFF : ALL 1 52-35-12Page 417 1 1 May 01/05 1 1 1CES 1R D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 53-42-14-000-001 Removal of the AFT Cargo-Compartment Floor-Panels Zone 150 53-42-14-400-001 Installation of the AFT Cargo-Compartment Floor-Panels Zone 150 52-35-12-991-002 Fig. 402
3. Job Set-up
__________
Subtask 52-35-12-860-051
A. Aircraft Maintenance Configuration
(1)
Make sure that the access panel 154AR of the door control panel below the fuselage is opened.
(2)
Make sure that the AFT cargo compartment door (referred to as cargo door) is opened and the actuator safety locks are installed (Ref. TASK 52-30-00-860-001).
(3)
Make sure that the floor panel 152AG of the AFT cargo compartment is removed (Ref. TASK 53-42-14-000-001).
Subtask 52-35-12-865-054
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
122VU DOORS/CARGO 1MJ T12
1EFF : ALL 1 52-35-12Page 418 1 1 Feb 01/02 1 1 1CES 1 1EFF : ALL 1 52-35-12Page 419 1 1 Feb 01/02 1 1 1CES 1 1EFF : ALL 1 52-35-12Page 420 1 1 Feb 01/02 1 1 1CES 1 Subtask 52-35-12-862-051
中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM DOORS 舱门6(92)
