B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-002 USA MIL-PRF-680
DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT)
(Ref. 20-31-00)
Material No. 15-005 AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-006 AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-11Page 606 1224-224, 228-228, 1May 01/05 1 1 1CES 1
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-30-00-860-006 Open the Bulk Cargo-Compartment Door 52-30-00-860-008 Close the Bulk Cargo-Compartment Door 52-33-13-000-001 Removal of the Lining and Insulation of the Bulk
Cargo-Compartment Door 52-33-13-400-001 Installation of the Lining and Insulation of the Bulk
Cargo-Compartment Door SRM 51-73-00 SRM 51-74-00 SRM 52-30-00 SRM 52-73-00
3. Job Set-up
__________
Subtask 52-33-11-010-064
A. Get Access
(1)
Put the adjustable access platform in position below the Bulk door.
(2)
Open the Bulk door (Ref. TASK 52-30-00-860-006) and remove the door net from the Bulk door area.
(3)
Remove the lining and the insulation of the Bulk door (Ref. TASK 52-33-13-000-001) to get access to the internal attachment area of the stop fittings.
4. Procedure
_________
Subtask 52-33-11-615-052
A. Cleaning Procedure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-11Page 607 1224-224, 228-228, 1May 01/05 1 1 1CES 1 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE SPECIAL
_______
MATERIAL.
THIS MATERIAL IS DANGEROUS.
(1) Clean the inspection area with CLEANING AGENTS (Material No. 11-002) and a lint-free cloth .
Subtask 52-33-11-210-060
B. Detailed Visual Inspection of the Fittings and the adjacent Structure
(1) Examine the stop fittings and the adjacent internal/external Bulk door structure for the subsequent damage.
(a) If you find a scratch,
-determine the extent of the damaged area, (Ref. SRM 52-30-00)
-remove the damage when it is less than the limit (Ref. SRM 51-73-00).
NOTE : When the scratch is larger than the limit, repair the
____ affected component (Ref. SRM 52-30-00).
(b) If you find a dent,
-determine the extent of the damaged area (Ref. SRM 52-30-00),
-remove the damage when it is less than the limit (Ref. SRM 52-73-00).
NOTE : When the dent is larger than the limit, repair the
____ affected component (Ref. SRM 52-30-00).
(c) If you find corrosion,
-determine the extent of the corroded area (Ref. SRM 52-30-00),
-remove the damage when it is less than the limit (Ref. SRM 51-74-00).
NOTE : When the corroded area is larger than the limit, repair
____ the affected component (Ref. SRM 52-30-00).
(2)
Make sure that all attachment bolts and screws of the fittings are correctly tightened.
(3)
Examine the sealant of all stop fittings for the correct condition. NOTE : If necessary, remove the old sealant with a wooden or plastic
____
scraper and apply new sealants.
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-11Page 608 1224-224, 228-228, 1May 01/05 1 1 1CES 1 Subtask 52-33-11-916-054
C. Application of Temporary Protection
CAUTION : DO NOT APPLY TEMPORARY PROTECTION ON THE OXYGEN SYSTEMS.
_______ MAKE SURE THAT THE TEMPORARY PROTECTION DOES NOT GET: -ON COMPOSITE PARTS, CONTROL CABLES, PULLEYS,TEFLON BEARINGS. -ON LUBRICATED SURFACES. -IN DRAIN VALVES OR OTHER ORIFICES. TEMPORARY PROTECTION ON OR IN THESE PARTS CAN CAUSE DAMAGE.
(1)
Cover the equipment and fittings adjacent to the area with masking paper or masking tape, if necessary.
(2)
Apply a layer of STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-006) to the inspection area.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门6(44)
