(a)
Remove and discard the cotter pin (221) from the nut (22).
(b)
Remove the nut (222), the washers (238), the bushes (239) and
(241) and the bolt (237).
(c)
Disconnect the eye-end of the link rod (181) from the fork-end of the bellcrank (215).
(3)
Disconnect the bellcrank (215) from the bellcrank lever (234) as follows:
(a)
Remove and discard the cotter pin (223) from the nut (224).
(b)
Remove the nut (224), the washers (233) and the bolt (232) from the upper fork-end of the bellcrank lever (234).
(c)
Remove the bushes (235) and (236) from the upper fork-end of the bellcrank lever (234).
(d)
Remove the bellcrank (215) from the linkage (234).
(e)
Remove the sleeve (240) from the bellcrank (215).
1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-32-21Page C413 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1 TASK 52-32-21-400-013
Installation of the Latching Unit
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-004 USA MIL-PRF-23827 TYPE I SYNTH.ESTER BASED GREASE HIGH PRESSURE (Ref. 20-31-00)
Material No. 15-005 AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-006 AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-32-21Page C414 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1 C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
172 cotter pin 52-32-21 37 -240 172 cotter pin 52-32-21 38 -240 203 cotter pin 52-32-21 37 -150 203 cotter pin 52-32-21 38 -150 206 cotter pin 52-32-21 37 -030 206 cotter pin 52-32-21 38 -030 221 cotter pin 52-32-21 43 -040 221 cotter pin 52-32-21 44 -040 223 cotter pin 52-32-21 43 -040 223 cotter pin 52-32-21 44 -040 225 cotter pin 52-32-21 43 -040 225 cotter pin 52-32-21 44 -040
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
12-22-52-640-002 Lubrication of the FWD and AFT Cargo-Compartment Doors 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump 52-32-00-720-001 Functional Test of the AFT Cargo-Compartment Door 52-32-11-820-002 Adjustment of the Door Mechanism
**ON A/C 001-049, 053-099, 101-149, 201-299, 301-399,
52-32-21-991-018 Fig. 418
R **ON A/C 151-199, 401-499,
52-32-21-991-018-A Fig. 418A
1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-32-21Page C415 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
3. Job Set-up
__________
Subtask 52-32-21-860-064
A. Aircraft Maintenance Configuration
(1)
Make sure that the AFT cargo-compartment door (referred to as cargo door) is opened and safetied with the actuator safety locks (Ref. TASK 52-30-00-860-001).
(2)
Make sure that the access platform in position below the opened cargo door.
(3) Make sure that the access panel 826AR is removed from the cargo door. Subtask 52-32-21-865-084
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU HYDRAULIC/HYD POWER/Y 3803GX N30 122VU DOORS/CARGO 1MJ T12 123VU Y HYD/ELEC/PUMP 3802GX AB06 123VU Y HYD/ELEC/ELEC PUMP/NORM 3801GX AB03
4. Procedure
_________
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门6(7)
