(2)
Apply SPECIAL MATERIALS (Material No. 05-027) to all exposed surfaces which you touched or moved.
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-31Page 412 1224-224, 228-228, 1May 01/05 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-105,
Subtask 52-33-31-410-050
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the BULK door (Ref. TASK 52-30-00-860-008).
(3)
Install the lining and insulation of the BULK door (Ref. TASK 52-33-13-400-001).
(4)
Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
(5) Remove the access platform(s). R **ON A/C 106-149, 221-221, 224-224, 228-228,
Subtask 52-33-31-410-050-A
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the BULK door (Ref. TASK 52-30-00-860-011).
(3)
Install the lining and insulation of the BULK door (Ref. TASK 52-33-13-400-001).
(4)
Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
(5)
Remove the access platform(s).
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-31Page 413 1224-224, 228-228, 1May 01/05 1 1 1CES 1
FITTING - DOOR FRAME - REMOVAL/INSTALLATION
___________________________________________ TASK 52-33-32-000-001 Removal of the Door Frame Fittings WARNING : INSTALL A SAFETY BARRIER WHEN YOU OPEN A DOOR IF THE ACCESS PLATFORM
_______ IS NOT USED.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
No specific circuit breaker(s) safety clip(s)
No specific access platform 2.3 m (7 ft. 7 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-30-00-860-006 Open the Bulk Cargo-Compartment Door 52-30-00-860-010 Open the Deactivated Bulk Cargo-Compartment Door 53-22-14-000-001 Removal of the FWD Cargo-Compartment Floor-Panels 52-33-32-991-001 Fig. 401
3. Job Set-up
__________ Subtask 52-33-32-865-050
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU EIS/SDAC1 AND 2/DOOR/DET/AVNCS 46WV P02
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-32Page 401 1224-224, 228-228, 1May 01/05 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-105,
Subtask 52-33-32-010-050
B. Get Access
(1)
Put the access platform in position below the Bulk cargo-compartment door (referred to as Bulk door).
(2)
Open the Bulk door (Ref. TASK 52-30-00-860-006).
(3)
Release the quick-release fasteners and remove the sidewall panels 162BW and 162EW.
(4)
If necessary, remove the screws (21) and the washers (22) from the protection cover (20). (Ref. Fig. 401/TASK 52-33-32-991-001)
(5)
Remove the protection cover (20) together with the plate (39) and the gasket (40) from the floor panel 162KF.
(6)
Remove the floor panels 162HF, 162GF, 162KF and 162LF (Ref. TASK 53-22-14-000-001).
(7)
If necessary, disengage the disc fasteners and the VELCRO tapes to remove the insulation mats adjacent the bulk door frame.
R **ON A/C 106-149, 221-221, 224-224, 228-228,
Subtask 52-33-32-010-050-A
B. Get Access
(1)
Put the access platform in position below the Bulk cargo-compartment door (referred to as Bulk door).
(2)
Open the Bulk door (Ref. TASK 52-30-00-860-010).
(3)
Release the quick-release fasteners and remove the sidewall panels 162BW and 162EW.
(4)
If necessary, remove the screws (21) and the washers (22) from the protection cover (20). (Ref. Fig. 401/TASK 52-33-32-991-001)
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-32Page 402 1224-224, 228-228, 1May 01/05 1 1 1CES 1
