(2)
Remove the nut (8), the washer set (6) and the stop screw (5) from the fitting assembly (7).
R 1EFF : 004-049, 055-099, 101-149, 221-221, 1 52-33-31Page 406 1224-224, 228-228, 1May 01/05 1 1 1CES 1
R **ON A/C 001-049, 051-099, 101-149, 221-221, 224-224, 228-228,
TASK 52-33-31-400-001
Installation of the Latch and the Stop Fitting
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 2.3 m (7 ft. 7 in.) R No specific Torque Wrench : range 0.00 to 1.20 m.daN R (0.00 to 9.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-002 USA MIL-P-8116 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)
Material No. 05-027 USA MIL-L-81309
RUST INHIBITOR(FOR CORROSION USE 15-004)
(Ref. 20-31-00)
Material No. 09-005 USA MIL-S-81733 CLASS C CORROSION INHIBITIVE INTERFAY SEALANT (Ref. 20-31-00)
Material No. 09-013 USA MIL-PRF-81733 TYPE I CLASS A
CORROSION INHIBITING BRUSH CONSISTENCY
(Ref. 20-31-00)
Material No. 09-016 USA MIL-PRF-81733D TYPE II CLASS B
CORROSION INHIBITING FILLET CONSISTENCY
(Ref. 20-31-00)
Material No. 09-018 USA AMS 3267/3
CORROSION INHIBITING LOW ADHESION SEALANT
(Ref. 20-31-00)
Material No. 16-003 F ASNB70720
COATING (OBSOLETE USE 16-021) (Ref. 20-31-00)
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-31Page 407 1224-224, 228-228, 1May 01/05 1 1 1CES 1
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
lockplate 52-33-31 01 -030
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump 52-30-00-860-006 Open the Bulk Cargo-Compartment Door 52-30-00-860-008 Close the Bulk Cargo-Compartment Door 52-30-00-860-010 Open the Deactivated Bulk Cargo-Compartment Door 52-30-00-860-011 Close the Deactivated Bulk Cargo-Compartment Door 52-33-11-100-001 Cleaning/Painting of the Bulk Cargo-Compartment Door 52-33-11-200-001 Inspection of the Bulk Cargo-Compartment Door 52-33-11-820-001 Adjustment of the Bulk Cargo-Compartment Door 52-33-13-000-001 Removal of the Lining and Insulation of the Bulk
Cargo-Compartment Door 52-33-13-400-001 Installation of the Lining and Insulation of the Bulk Cargo-Compartment Door
R **ON A/C 001-003, 051-054,
52-33-31-991-001 Fig. 401
R **ON A/C 004-049, 055-099, 101-149, 221-221, 224-224, 228-228,
52-33-31-991-001-A Fig. 401A
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-31Page 408 1224-224, 228-228, 1May 01/05 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-149, 221-221, 224-224, 228-228,
3. Job Set-up
__________ R **ON A/C 001-049, 051-099, 101-105,
Subtask 52-33-31-860-050
A. Aircraft Maintenance Configuration
(1)
Make sure that the AFT cargo-compartment door is opened (Ref. TASK 52-30-00-860-001).
(2)
Make sure that the access platform is in position below the Bulk cargo-compartment door (referred to as Bulk door).
(3)
Make sure that the lining and insulation of the BULK door are removed (Ref. TASK 52-33-13-000-001).
(4) Make sure that the Bulk door is opened (Ref. TASK 52-30-00-860-006). R **ON A/C 106-149, 221-221, 224-224, 228-228,
Subtask 52-33-31-860-050-A
A. Aircraft Maintenance Configuration
(1)
Make sure that the AFT cargo-compartment door is opened (Ref. TASK 52-30-00-860-001).
(2)
Make sure that the access platform is in position below the Bulk cargo-compartment door (referred to as Bulk door).
(3)
Make sure that the lining and insulation of the BULK door are removed (Ref. TASK 52-33-13-000-001).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门6(70)
