(a)
Apply a thin layer of the SPECIAL MATERIALS (Material No. 05-002) to the bolt (2), the washers (19) and the nut (18).
(b)
Put the eye-end (1) in its installation position and attach it with the bolt (2), the washers (19) and the nut (18).
(c)
Tighten the nut (18) and safety it with the cotter pin (17).
(d)
Apply SPECIAL MATERIALS (Material No. 05-005) to the head of the bolt (2) and the nut (18)
R 1EFF : 001-049, 101-105, 151-199, 201-210, 1 52-41-22Page 415 1 1 May 01/05 1 1 1CES 1
(6) Remove the pip-pin (6) from the rigging hole of fuselage fitting and
put it in the stowage hole.
(7) Install the air intake diffuser and the elbow (Ref. TASK 49-16-45-
400-003).
R **ON A/C 051-099,
R Subtask 52-41-22-420-052
R D. Installation of the APU Access Door 316AR
R WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______
R MATERIALS ONLY WITH A GOOD SUPPLY OF AIR.
R OBEY THE MANUFACTURERS INSTRUCTIONS.
R PUT ON PROTECTIVE CLOTHING.
R DO NOT GET THEM IN YOUR MOUTH.
R DO NOT SMOKE.
R DO NOT BREATHE THE GAS.
R THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT.
R GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R (1) Make sure that the pip-pin (6) is correctly installed in the rigging
R hole of the fuselage bracket.
R NOTE : The pip-pin (6) holds the spring assembly of the door linkage____
R mechanism (which has a load of 260 daN (584.5031 lbf)) in its
R extended position if the APU access door (4) is removed.
R (2) Put the APU access door (4) in position so that its hinge fittings
R (7) engage with the mounting bracket (8) of the fuselage.
R (3) Make sure that their attachment holes align and install the
R quick-release pins (9) into the mounting brackets (8).
R (4) Install the bonding straps (10) with the bolts (12) and the washers
R (11) to the APU access door (4) (Ref. TASK 20-28-00-912-004).
R (5) Connect the door linkage mechanism with the APU access door (4) as
R follows:
R (a) Apply a thin layer of the SPECIAL MATERIALS (Material No. 05-002)
R to the bolt (2), the washers (19) and the nut (18).
R (b) Put the eye-end (1) in its installation position and attach it
R with the bolt (2), the washers (19) and the nut (18).
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 52-41-22Page 416 1201-210, 1May 01/05 1 1 1CES 1
(c)
Tighten the nut (18) and safety it with the new cotter pin (17).
(d)
Apply SPECIAL MATERIALS (Material No. 05-005) to the head of the bolt (2) and the nut (18).
(6)
Remove the pip-pin (6) from the rigging hole of fuselage fitting and put it in the stowage hole.
(7)
Install the air intake diffuser and the elbow (Ref. TASK 49-16-45-400-001).
R **ON A/C 106-149, 211-299, 301-399, 401-499,
Subtask 52-41-22-420-052-B
D. Installation of the APU Access Door 316AR
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(1) Make sure that the pip-pin (6) is correctly installed in the rigging hole of the fuselage bracket.
NOTE : The pip-pin (6) holds the spring assembly of the door linkage
____ mechanism (which has a load of 260 daN (584.5031 lbf)) in its extended position if the APU access door (4) is removed.
(2)
Put the APU access door (4) in position so that its hinge fittings
(7) engage with the mounting bracket (8) of the fuselage.
(3)
Make sure that their attachment holes align and install the quick-release pins (9) into the mounting brackets (8).
(4)
Install the bonding straps (10) with the bolts (12) and the washers
(11) to the APU access door (4) (Ref. TASK 20-28-00-912-004).
R 1EFF : 051-099, 106-149, 211-299, 301-399, 1 52-41-22Page 417 1401-499, 1Aug 01/05 1 1 1CES 1
(5)
Connect the door linkage mechanism with the APU access door (4) as follows:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门6(164)
