• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 00:00来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者


 Subtask 52-33-41-020-053
 D. Removal of the Forward and/or Aft Lever(s) (15),(21)
 (1)
 Carefully open the Bulk door sufficently and safety it with an applicable support device.

 (2)
 Remove the connection rod (11) (Ref. Para. 4.A) to release the torsion spring (53).


R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-41Page 408 1224-224, 228-228, 1May 01/05 1 1 1CES 1


 (3)
 Remove the pre-load unit (20) (Ref. Para. 4.B).

 (4)
 Remove the torsion spring (53) (Ref. Para. 4.C).

 (5)
 Remove and discard the cotter pins (56) from the nuts (57).

 (6)
 Remove the nuts (57), the washers (58) and the bolts (59) to release the levers (15),(21).

 (7)
 Carefully move the serrated sleeve (54) or (61) through the flange bearing until it comes free from the Bulk door.

 (8)
 During this movement, remove the washer (60), the forward or aft lever (15),(21) and the spacer (55) from the serrated sleeve (54) or (61).


R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-41Page 409 1224-224, 228-228, 1May 01/05 1 1 1CES 1 TASK 52-33-41-400-001


 Installation of the Balance Mechanism
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific adjustment gage
 No specific support device
 No specific access platform 2.10 m (6 ft. 11 in.)
 No specific access platform 2.30 m (7 ft. 7 in.)

R No specific  Torque Wrench : range 0.00 to 1.20 m.daN
R  (0.00 to 9.00 lbf.ft)
 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
No specific  lockwire, corrosion-resistance steel, dia 0.63 mm
 Material No. 04-011  USA MIL-G-4343
 SILICONE GREASE PNEUMATIC SYST AND SEALS
 (Ref. 20-31-00)

 C. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION  |IPC-CSN
 -------------------------------------------------------------------------------
1 cotter pin 52-33-04 01 -070 1 cotter pin 52-33-04 01A-070 12 cotter pin 52-33-41 01 -190 12 cotter pin 52-33-41 01A-190 27 cotter pin 52-33-41 01 -080 27 cotter pin 52-33-41 01A-080 56 cotter pin 52-33-41 02 -040
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-41Page 410 1224-224, 228-228, 1May 01/05 1 1 1CES 1


 D. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
 Yellow Electric Pump 52-30-00-860-006 Open the Bulk Cargo-Compartment Door 52-30-00-860-008 Close the Bulk Cargo-Compartment Door 52-30-00-860-011 Close the Deactivated Bulk Cargo-Compartment Door 52-33-11-820-003 Adjustment of the Balance Mechanism 52-33-13-000-001 Removal of the Lining and Insulation of the Bulk
 Cargo-Compartment Door 52-33-13-400-001 Installation of the Lining and Insulation of the Bulk
 Cargo-Compartment Door 52-33-41-991-001 Fig. 401 52-33-41-991-002 Fig. 402 52-33-41-991-003 Fig. 403
 3. Job Set-up
__________
 (Ref. Fig. 401/TASK 52-33-41-991-001, 402/TASK 52-33-41-991-002, 403/TASK 52-33-41-991-003)
 Subtask 52-33-41-860-050
 A. Aircraft Maintenance Configuration
 (1)
 Make sure that the AFT cargo-compartment door (Ref. TASK 52-30-00-860-001) is opened.

 (2)
 Put the access platform 2.10 m (6 ft. 11 in.) in position at the AFT cargo-compartment door.

 (3)
 Remove the divider net at FR59 to get access to the Bulk cargo compartment.

 (4)
 Remove the door net from the opening to get access to the closed Bulk cargo-compartment door (referred to as Bulk door).

 (5)
 Remove the lining from the Bulk door and the insulation from the work area (Ref. TASK 52-33-13-000-001).


R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-41Page 411 1224-224, 228-228, 1May 01/05 1 1 1CES 1
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM DOORS 舱门6(79)