• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 00:00来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

R  sure that it goes automatically back to the NEUTRAL position. 
R  (7) Connect the hydraulic connections as follows: 
R  (a) Remove the blanking plugs from the pipe ends and the valve body 
R  (13). 
R  (b) Make sure that the hydraulic line end-fittings are serviceable. 
R  (c) Apply HYDRAULIC FLUIDS (Material No. 02-003) to the threads of 
R  the line end fittings. 
R  (d) Put the hydraulic lines (5), (17), (18) and (19) carefully on the 
R  valve body (13). 
R  (e) TORQUE the union nuts (4), (16), (20) and (21) to between 1.5 and 
R  1.7 m.daN (11.06 and 12.53 lbf.ft). 
R  (8) Operate the selector (3) to make sure that it goes automatically back 
R  to the NEUTRAL position. 
R  (9) Remove the blanking caps from the electrical connector (11) and the 
R  receptacle of the proximity switch (12).

 

R (10) Make sure that the electrical connectors are clean and in the correct R condition. R (11) Connect the electrical connector (11) to the proximity switch (12). Subtask 52-36-15-910-050
 B. Preparation for the Test
 (1)
 Remove the warning notices from the ground service panel and the overhead panel of the cockpit.

 (2)
 Pressurize the reservoir of the Yellow hydraulic system (Ref. TASK 29-14-00-614-002).

 (3)
 Pressurize the Yellow hydraulic system (Ref. TASK 29-24-00-863-001).

 (4)
 Connect the PTU isolation coupling (Ref. TASK 29-23-00-860-002).


 (5) Remove the safety locks from the door actuators.
 Subtask 52-36-15-865-052

 C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1MJ, 3801GX, 3802GX, 3803GX
 Subtask 52-36-15-710-051
 D. Operational Test
 (1)
 Bleed the hydraulic system of the cargo compartment doors (Ref. TASK 52-36-00-600-001) to remove possible air bubbles .

 (2)
 Make sure that the selector (3) moves always to the NEUTRAL position when you release it during the bleeding procedure.

 (3)
 Examine the hydraulic connections of the manual selector valve 2501MJ or 2504MJ and make sure that there are no leaks.


 1EFF : ALL 1 52-36-15Page 411 1 1 Aug 01/04 1 1 1CES 1


 5. Close-up
________
 **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,

 Subtask 52-36-15-410-050
 A. Close Access
 FOR 2501MJ

 (1)
 Install the applicable floor panel in the FWD cargo compartment between FR29 and FR30 (Ref. TASK 53-22-14-400-001).

 (2)
 Close and lock the FWD cargo door correctly (Ref. TASK 52-30-00-860-002).

 (3)
 Make sure that the access panel 134AR of the control panel is closed. FOR 2504MJ

 (4)
 Install the applicable floor panel in the AFT cargo compartment between FR56 and FR57 (Ref. TASK 53-42-14-400-001).

 (5)
 Close and lock the AFT cargo door correctly (Ref. TASK 52-30-00-860-002).

 (6)
 Make sure that the access panel 154AR of the control panel is closed.

 (7)
 Depressurize the Yellow hydraulic system (Ref. TASK 29-10-00-864-002).


R **ON A/C 151-199, 401-499,
 Subtask 52-36-15-410-050-A
 A. Close Access
 FOR 2501MJ

 (1)
 Install the applicable floor panel in the FWD cargo compartment between FR29 and FR30 (Ref. TASK 53-22-14-400-001).

 (2)
 Close and lock the FWD cargo door correctly (Ref. TASK 52-30-00-860-002).


 1EFF : ALL 1 52-36-15Page 412 1 1 Aug 01/05 1 1 1CES 1


 (3)
 Make sure that the access panel 134AR of the control panel is closed. FOR 2504MJ

 (4)
 Install the applicable floor panel in the AFT cargo compartment between FR59 and FR60 (Ref. TASK 53-42-14-400-001).

 (5)
 Close and lock the AFT cargo door correctly (Ref. TASK 52-30-00-860-002).

 (6)
 Make sure that the access panel 154AR of the control panel is closed.

 (7)
 Depressurize the Yellow hydraulic system (Ref. TASK 29-10-00-864-002).


R 1EFF : 151-199, 401-499, 1 52-36-15Page 413 1 1 Aug 01/05 1 1 1CES 1


R  **ON A/C ALL
 TASK 52-36-15-000-003
 Removal of the Proximity Switch
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM DOORS 舱门6(123)