(2)
Put the access platform in position below the opened cargo door.
(3)
Remove the access panel 826AR from the cargo door.
(4)
Remove the fairing from the outer skin of the cargo door (Ref. TASK 53-35-13-000-001).
1EFF : ALL 1 52-32-31Page 407 1 1 May 01/98R 1 1 1CES 1
(5) Remove the lining and insulation from the cargo door as requested. (Ref. TASK 52-32-13-000-001).
Subtask 52-32-31-865-052
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
122VU DOORS/CARGO 1MJ T12
4. Procedure
_________ Subtask 52-32-31-020-051
A. Removal of the X-stops
(Ref. Fig. 402/TASK 52-32-31-991-002)
(1)
Remove the lateral screws (1),(10).
(2)
Remove the nuts (5),(14), the washers (6),(15) and the screws (3),(12).
(3)
Remove the X-stops (2),(11) and the shims (4),(13) from the cargo door.
R 1EFF : ALL 1 52-32-31Page 408 1 1 Aug 01/02 1 1 1CES 1
R X-Stops Figure 402/TASK 52-32-31-991-002
1EFF : 1 1 1CES ALL 1 111 52-32-31 Page 409 Aug 01/02
TASK 52-32-31-400-002
Installation of the X-Stops
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 09-019 USA AMS 3267/3
LOW ADHESION CORROSION INHIBITING SEALANT
(Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump
52-31-13-400-001 Installation of the Lining and the Insulation
52-32-13-000-001 Removal of the Lining and Insulation
53-35-13-000-001 Removal of the Belly Fairing Access Panels
53-35-13-400-001 Installation of the Belly Fairing Access Panels
R 52-32-31-991-002 Fig. 402
1EFF : ALL 1 52-32-31Page 410 1 1 Aug 01/02 1 1 1CES 1
3. Job Set-up
__________
Subtask 52-32-31-860-052
A. Aircraft Maintenance Configuration
(1)
Make sure that the AFT cargo-compartment door (referred to as cargo door) is opened and safetied with the actuator safety locks (Ref. TASK 52-30-00-860-001).
(2)
Make sure that the access platform in position below the opened cargo door.
(3)
Make sure that the access panel 826AR is removed from the cargo door.
(4)
Make sure that the fairing is removed from the outer skin of the cargo door (Ref. TASK 53-35-13-000-001).
(5)
Make sure that the lining and insulation is removed from the cargo door as requested. (Ref. TASK 52-32-13-000-001).
Subtask 52-32-31-865-053
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
122VU DOORS/CARGO 1MJ T12
4. Procedure
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门6(18)
