(4)
Put the access door (2) on the hinges (3) and attach it with the bolts (9), the washers (10) and the nuts (11).
(5)
Put the bonding strap (6) on the upper hinge (3) and attach it with the bolt (1), the washer (8) and the nut (7) (Ref. TASK 20-28-00-912-004).
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 52-41-24-820-050
B. Adjustment of the Access Door of the Blue Hydraulic System
(1)
Carefully close and lock the access door (2).
(2)
Make sure that the values of the permitted contour offset and the gap between the access door (2) and the panel 197BB are in the limits.
**ON A/C 001-049, 051-061, 101-103, 201-203,
(Ref. Fig. 402/TASK 52-41-24-991-002) R **ON A/C 062-099, 104-149, 151-199, 204-299, 401-499,
(Ref. Fig. 402A/TASK 52-41-24-991-002-A)
1EFF : ALL 1 52-41-24Page 410 1 1 Aug 01/05 1 1 1CES 1
Adjustment of the Access Door of the Blue Hydraulic System
Figure 402/TASK 52-41-24-991-002
R 1EFF : 001-049, 051-061, 101-103, 201-203, 1 52-41-24Page 411 1 1 May 01/05 1 1 1CES 1
Adjustment of the Access Door of the Blue Hydraulic System
Figure 402A/TASK 52-41-24-991-002-A
R 1EFF : 062-099, 104-149, 151-199, 204-299, 1 52-41-24Page 412 1401-499, 1Aug 01/05 1 1 1CES 1
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
(3)
If it is necessary to adjust the access door (2):
(a)
Remove the accesss panel 197BB as necessary (Ref. TASK 53-35-13-000-002).
(b)
Loosen the screws (31).
(c)
Adjust the latch hook (30) until you get the correct values.
(d)
Tighten the screws (31).
(4)
Make sure that it is possible to open and close the access door (2) correctly.
(5)
Make sure that the latch assembly is correctly locked and that the access door (2) makes a continues surface with the skin of the aircraft.
**ON A/C 301-399,
Subtask 52-41-24-820-050-A
B. Adjustment of the Access Door of the Blue Hydraulic System
(1)
Carefully close and lock the access door (2).
(2)
Make sure that the values of the permitted contour offset and the gap between the access door (2) and the panel 197KB are in the limits. (Ref. Fig. 402B/TASK 52-41-24-991-002-B)
(3)
If it is necessary to adjust the access door (2):
(a)
Remove the accesss panel 197KB as necessary (Ref. TASK 53-35-13-000-002).
(b)
Loosen the screws (31).
(c)
Adjust the latch hook (30) until you get the correct values.
(d)
Tighten the screws (31).
(4)
Make sure that it is possible to open and close the access door (2) correctly.
1EFF : ALL 1 52-41-24Page 413 1 1 Aug 01/05 1 1 1CES 1R Adjustment of the Access Door of the Blue Hydraulic System R Figure 402B/TASK 52-41-24-991-002-B
1EFF : 301-399, 1 52-41-24Page 414 1 1 May 01/04 1 1 1CES 1
(5) Make sure that the latch assembly is correctly locked and that the access door (2) makes a continues surface with the skin of the aircraft.
**ON A/C ALL
5. Close-up
________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 52-41-24-410-050
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
If removed, install the access panel 197BB (Ref. TASK 53-35-13-400-002).
(3) Remove the access platform(s).
**ON A/C 301-399,
Subtask 52-41-24-410-050-A
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
If removed, install the access panel 197KB (Ref. TASK 53-35-13-400-002).
(3)
Remove the access platform(s).
1EFF : ALL 1 52-41-24Page 415 1 1 Aug 01/05 1 1 1CES 1 SERVICE DOORS - DESCRIPTION AND OPERATION
_________________________________________
1.
General
_______
The service doors give access to the systems and equipment for servicing.
2.
Component Location
__________________ R **ON A/C 001-049, 052-099, 101-149, 151-199, 201-299, 301-399, 401-499,
(Ref. Fig. 001)
**ON A/C 051-051,
(Ref. Fig. 001A)
**ON A/C ALL
-------------------------------------------------------------------------------FIN I FUNCTIONAL DESIGNATION I PANELIZONEIACCESS I ATA I I I I DOOR I REF. ------------------------------------------------------------------------------- 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM DOORS 舱门6(169)
