(1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure_________
Subtask 53-11-00-210-086
R R A. Inspection (Ref. Fig. 657/TASK 53-11-00-991-066)
R R R (1) Do a general visual inspection of the fuselage internal structure and floor structure. This inspection includes the NLG well panels and is applicable between FR1 and FR12, below the cockpit floor panels.
R (2) Make sure that there is no:
R R R R (a) Corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types of corrosion, inspection, removal and corrosion protection.
R R R R R (b) Other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
R R (3) Make sure that all the installations are attached correctly.
Subtask 53-11-00-916-069
R B. Application of the Temporary Protection
CAUTION : DO NOT APPLY TEMPORARY PROTECTION ON THE OXYGEN SYSTEMS._______ MAKE SURE THAT THE TEMPORARY PROTECTION DOES NOT GET: -ON COMPOSITE PARTS, CONTROL CABLES, PULLEYS,TEFLON BEARINGS. -ON LUBRICATED SURFACES. -IN DRAIN VALVES OR OTHER ORIFICES. TEMPORARY PROTECTION ON OR IN THESE PARTS CAN CAUSE DAMAGE.
(1) Apply masking paper or masking tape BONDING AND ADHESIVE COMPOUNDS (Material No. 08-074) on the equipment and fittings adjacent to the area.
R Fuselage Internal Structure between FR1 and FR12 Figure 657/TASK 53-11-00-991-066
EFF : ALL 53-11-00 Page B628 Aug 01/03
CES
(2) Apply a layer of STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-006) to the inspection area.
(3) Remove the masking tape or the masking paper.
5. Close-up________
Subtask 53-11-00-410-097
A. Close Access
R (1) Install the air conditioning ducts.
R (2) Install the insulation blankets (Ref. TASK 25-80-00-400-001).
(3) Install the floor panels (Ref. TASK 53-12-13-400-001): 121AF, 121BF, 121CF, 122BF.
(4) Make sure that the work area is clean and clear of tool(s) and other items.
R R (5) Close the avionics-compartment door 811 812 822 (Ref. TASK 52-41-00-410-002) .
(6) Remove the access platform(s).
TASK 53-11-00-210-807
General Visual Inspection of Fuselage Internal Structure and Floor Structure, Including NLG Bay Aft Face, between FR 21 and FR 24, below Cabin Floor Panels
1. Reason for the Job
__________________
Refer to the MPD TASK: 531193-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 1.80 m (5 ft. 11 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific masking paper Material No. 08-074 MASKING TAPE (Ref. 20-31-00)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM FUSELAGE 机身1(84)