(4)
Put an adjustable access platform in position at zone 824.
(5)
Open the avionics compartment door 824 (Ref. TASK 52-41-00-010-002).
(6)
Remove the avionics-compartment floor panels (Ref. TASK 53-12-13-000-001).
R **ON A/C 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499,
4. Procedure
_________
R **ON A/C 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499, Post SB 53-1143 For A/C 001-003, Subtask 53-19-00-710-050
A. Inspection
(Ref. Fig. 602/TASK 53-19-00-991-002)
(1) In the avionics compartment:
(a) Use a flashlight to make sure that the drainage pipe connectors on the outputs of the fluid collector are in the correct condition.
R EFF : 001-049, 054-099, 101-149, 151-199, 53-19-00Page 606 201-299, 301-399, 401-499, Aug 01/05
CES
Cockpit Drainage Pipe Figure 602/TASK 53-19-00-991-002
R EFF : 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499, 53-19-00 Page 607 Aug 01/05
CES
(b)
Do a detailed visual inspection of the cockpit drainage pipe:
-fill the fluid collector with water and do a check of the drainage pipe for leaks.
(c)
If the drainage pipe is blocked, flush the drainage pipe with water.
R **ON A/C 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499,
5. Close-up
________
R **ON A/C 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499, Post SB 53-1143 For A/C 001-003, Subtask 53-19-00-410-054
A. Close Access
(1)
Install the collector grid (Ref. TASK 53-19-41-400-001).
(2)
Install the avionics-compartment floor panels (Ref. TASK 53-12-13-400-001).
(3)
Make sure that the work area is clean and clear of tool(s) and other items.
(4)
Close the avionics compartment door 824 (Ref. TASK 52-41-00-410-002).
(5)
Close the FWD passenger/crew door 831 (841) (Ref. TASK 52-10-00-410-001).
(6)
Remove the access platform(s).
R EFF : 001-049, 054-099, 101-149, 151-199, 53-19-00Page 608 201-299, 301-399, 401-499, Aug 01/05
CES **ON A/C ALL
TASK 53-19-00-710-003
Operational Check of Piston Type Drain Valves in Lower Fuselage Shell from Outside WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
1.
Reason for the Job
__________________
Refer to the MPD TASK: 531900-03
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 2 m (6 ft. 7 in.)
No specific 1 PROBE - NON METALLIC, FLEXIBLE
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
**ON A/C 001-049, 051-099, 101-149, 201-299,
53-19-00-991-003 Fig. 603 R **ON A/C 151-199, 401-499,
53-19-00-991-003-B Fig. 603A
EFF : ALL
53-19-00Page 609
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
**ON A/C 301-399,
53-19-00-991-003-A Fig. 603B
**ON A/C ALL
3. Job Set-up
__________
Subtask 53-19-00-010-056
A. Get Access
(1) Put the access platform in position.
4. Procedure
_________
Subtask 53-19-00-710-052
A. Inspection Procedure
**ON A/C 001-049, 051-099, 101-149, 201-299,
(Ref. Fig. 603/TASK 53-19-00-991-003) R **ON A/C 151-199, 401-499,
(Ref. Fig. 603A/TASK 53-19-00-991-003-B)
**ON A/C 301-399,
(Ref. Fig. 603B/TASK 53-19-00-991-003-A)
EFF : ALL
53-19-00Page 610
Piston-Type Drain Valves Figure 603/TASK 53-19-00-991-003
R EFF : 001-049, 051-099, 101-149, 201-299, 53-19-00 Page 611 May 01/05
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身1(122)
