__________________
Refer to the MPD TASK: 531102-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
SRM 511100 P.Block 001 (for corrective action)
SRM 512200 P.Block 001 (for corrective action)
53-11-00-991-001 Fig. 601
EFF : ALL
53-11-00Page 601
3. Job Set-up__________
Subtask 53-11-00-010-050
A. Get Access
R R (1) Put an access platform in position in front of the forward passenger/crew door 831 (841).
Subtask 53-11-00-110-051
B. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R R R (1) Clean the inspection areas with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure_________
Subtask 53-11-00-220-066
A. Inspection (Ref. Fig. 601/TASK 53-11-00-991-001)
R R (1) Do a detailed inspection of the structure of the upper corners of the door frame, external surface, left and right sides.
(2) Make sure that there is no:
R R (a) corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types, inspection, removal and corrosion protection.
EFF : ALL
53-11-00Page 602
May 01/03
R Upper Corners of the Door Frame of the Forward Passenger/Crew Door Figure 601/TASK 53-11-00-991-001
EFF : ALL
53-11-00Page 603
May 01/03
CES EFF : ALL
(b) other damage (cracks, scratches, stress, marks, dents,
bumps,...):
R - If you find other damage, refer to the Structural Repair Manual
R (Ref. SRM 511100 P.Block 001) for damage classification and
R corrective action.
5. Close-up________
Subtask 53-11-00-410-050
A. Close Access
R
R (1) Make sure that the work area is clean and clear of tool(s) and other
R items.
R (2) Remove the access platform(s).
53-11-00Page 604
May 01/03
TASK 53-11-00-210-002
R Detailed Inspection of Forward Passenger/Crew Door Frame, Forward Lower Corner R underneath the Scuff Plate, LH/RH
1. Reason for the Job
__________________
Refer to the MPD TASK: 531104-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R No specific access platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身1(37)
