EFF : ALL
53-11-00Page 632
May 01/03
R Edges of the Corners of the Nose-Gear Door Frame Figure 608/TASK 53-11-00-991-005
EFF : ALL 53-11-00 Page 633 May 01/03
CES
(b) other damage (cracks, scratches, stress, marks, dents,
bumps,...):
R - If you find other damage, refer to the Structural Repair Manual
R (Ref. SRM 511100 P.Block 001) for damage classification and
R corrective action.
R 5. Close-up________
R Subtask 53-11-00-942-097
R A. Close Access
R (1) Make sure that the work area is clean and clear of tool(s) and other
R items.
R (2) Remove the access platform(s).
EFF : ALL
53-11-00Page 634
May 01/03
TASK 53-11-00-210-006
R Detailed Inspection of Fuselage Skin above Windshield, between FR 4 and FR 12, R External Surface, LH/RH
1.
Reason for the Job
__________________
Refer to the MPD TASK: 531114-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 4.50 m (14 ft. 9 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
SRM 511100 P.Block 001 (for corrective action) SRM 512200 P.Block 001 (for corrective action) R 53-11-00-991-006 Fig. 609
EFF : ALL
53-11-00Page 635
3. Job Set-up__________
Subtask 53-11-00-941-054
A. Get Access
R (1) Put an access platform in position at the zone 211/212.
Subtask 53-11-00-110-058
B. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R R R (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure_________
Subtask 53-11-00-220-071
R A. Inspection (Ref. Fig. 609/TASK 53-11-00-991-006)
R R (1) Do a detailed inspection of the structure of the upper skin panels above the windshield, L and R sides.
(2) Make sure that there is no:
R R (a) corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types, inspection, removal and corrosion protection.
EFF : ALL
53-11-00Page 636
May 01/03
R R Upper Skin Panels above the Windshield Figure 609/TASK 53-11-00-991-006
EFF : ALL 53-11-00 Page 637 May 01/03
CES
R R R (b) other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up________
Subtask 53-11-00-942-054
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Remove the access platform(s).
EFF : ALL
53-11-00Page 638
R
TASK 53-11-00-210-007
Detailed Inspection of Upper Skin of Lower Longitudinal Lap Joint, between FR 9 and FR 20, External Surface, LH/RH
1. Reason for the Job
__________________
Refer to the MPD TASK: 531119-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身1(44)
